English 
Français
Deutsch- ← Previous item
- Pos.-No. 23208226
- Next item →
Klüber Microlube GB 0 Universal high-performance lubricant 25kg
€ 868.64 868.64 incl. VAT (729.95 excl. VAT), per piece *
Availability: Available
Packaging unit: 1 piece
Manufacturer: KLUBER
Country of origin: ES/0011
Customs tariff number: 27101999
Weight per piece: 30.0 kg
No problem. Simply fill out the form and we will answer you as soon as possible.
Universal high-performance lubricant.
- MICROLUBE GB 0 is a special mineral oil based lubricant. It has a high pressure absorption capacity, provides excellent protection against wear and corrosion, and shows a good wetting behaviour and water resistance.
- Size: 25kg bucket
- Available in 400g cartridge , 1kg can, 25kg bucket, 180kg drum
Benefits for your application:
- Universal high-performance lubricant
- High pressure absorption capacity
- Good wear protection
- Good anticorrosion behaviour
- Pumpable through centralized systems
Application:
MICROLUBE GB 0 was especially developed for friction points subject to high loads and mixed friction conditions. It is a universal grease suitable for the lubrication of eccentric presses (e.g. make Müller-Weingarten), heavy-duty spur and bevel gears with steel/steel components (e.g. gear motors that are not oiltight), slideways, guides and sump lubricated rolling bearings.
Application notes:
MICROLUBE GB 0 is applied by brush, spatula, grease gun or centralized lubrication system. Immersion lubrication of gears is possible up to a peripheral speed of approx. 3 m/s or via forcedfeed lubrication.
Product data:
| Article number | 020232 |
| Texture | homogeneous |
| Color space | red |
| Appearance | transparent |
| Density at 20 °C | approx. 0.90 g/cm³ |
| Worked penetration, DIN ISO 2137, 25 °C, lower limit value | 355 x 0.1 mm |
| Worked penetration, DIN ISO 2137, 25 °C, upper limit value | 385 x 0.1 mm |
| Base oil viscosity at 40 °C, calculated value | approx. 590 mm²/s |
| Base oil viscosity at 100 °C, calculated value | approx. 31.5 mm²/s |
| Shear viscosity at 25 °C, shear rate 300 s-1; equipment:rotational viscometer | approx. 3 000 mPas |
| Drop point, DIN ISO 2176, IP 396 | > 180 °C |
| Flow pressure of lubricating greases, DIN 51805, test temperature: -25 °C | < 1 400 mbar |
| FZG scuffing test, based on DIN ISO 14635, A/2,76/50, scuffing load stage | >= 12 |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. | 36 months |
Hazard Statements (CLP)
Hazard Statements (H-Statements)
- H319: Causes serious eye irritation.
Precautionary Statements (P-Statements)
Prevention:
- P264: Wash skin thoroughly after handling.
- P280: Wear eye protection/face protection.
Response:
- P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P337 + P313: If eye irritation persists: Get medical advice/attention.
Additional Labelling (EUH-Statements)
- EUH208: Contains dibutyl [[bis[(2-ethylhexyl)oxy]phosphinothioyl]thio]succinate. May produce an allergic reaction.
KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com
| Property | GTIN/EAN | MPN (Manufacturer Part Number) |
|---|---|---|
| - | - | 943150193 |
* Price in Euro including VAT, plus forwarding charges.
In parentheses: price in Euro excluding VAT, plus forwarding charges.
Clients outside the EU as well as companies outside of Germany don't pay any VAT (excepting for shipping in Germany)!
Follow us