Klüberfood NH1 11-572 Special grease for food industry 1 kg can

Klüberfood NH1 11-572 Lubricating grease for the food-processing and pharmaceutical industries | N° 096162

As an operator or OEM of large installations where rolling bearings run under high loads, you have to observe a wide variety of influences: to ensure trouble-free operation, reduce downtime and, above all, increasing pressure for cost savings. Our H1-registered Klüberfood NH1 11-572 is both a high-performance and attractively priced lubricating grease based on white oil and aluminium complex soap thickener.

• Temperature range: -15°C to +120°C 
• Volume: 1kg can
• Also available in: 400g cartridge, 25kg bucket, 180kg drum

Benefits for your application

• Considerable cost savings possible through
  • attractive price-performance ratio
  • reduced lubricant consumption
• Longer maintenance intervals due to good load-carrying capacity and good resistance to wear and corrosion
• Easy and convenient application due to good pumpability and metering via centralised lubrication systems
• NSF H1 registered and in compliance with kosher and halal requirements
• ISO 21469 certified – supports compliance with the hygienic requirements of your production You will find further information about ISO Standard 21469 on our website www.klueber.com

Applications

• Klüberfood NH1 11-572 is used for the lubrication of rolling bearings of machines and installations in the food-processing industry, e.g. in the processing of grain, meal and pellet animal feeds. Besides lubrication directly at the individual lube point by means of grease gun or lubricant dispenser, Klüberfood NH1 11-572 can also be applied to medium-temperature areas conveniently via centralised lubrication systems, e.g. bearings or rollers in animal feed pellet presses. 

Application notes

• Klüberfood NH1 11-572 can be applied by standard commercial grease application equipment, e.g. spatula, grease gun or via central lubrication systems.
• Before applying Klüberfood NH1 11-572, all lubrication points should be thoroughly cleaned to ensure maximum hygiene conditions exist. This is highly recommended for food-safe H1 lubrication. If your production process does not allow cleaning, we recommend you to replace the existing grease by purging the system during relubrication. 

Technical specifications

Manufacturer number	0961620037
Lower service temperature	-15 °C
Upper service temperature	120 °C
Texture	homogeneous
Colour space	white
Flow pressure, DIN 51805-2, -15°C	<= 1 400 mbar
Density at 20 °C	approx. 0.92 g/cm³
Kinematic viscosity of the base oil 100 °C	approx. 45 mm²/s
Kinematic viscosity of the base oil 40 °C	approx. 565 mm²/s
Dropping point, DIN ISO 2176 / IP 396	≥ 230 °C
Four-ball tester, welding load, DIN 51350-4	≥ 3500 N

Klüberfood NH1 11 572, Klüberfood NH1 11572