Klüberlub NH1 11-222 Multi-purpose lubricant for food industry 370g

Multi-purpose lubricant for the food-processing and pharmaceutical industries.
 

• Klüberlub NH1 11-222 is a lubricating grease based on paraffinic mineral oil and aluminium complex soap. Klüberlub NH1 11-222 is resistant to water and hot  water.
• Klüberlub NH1 11-222 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570.
• he lubricant was developed for incidental contact with  products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries.
• The use of Klüberlub NH1 11-222 can contribute to increase reliability of your production processes.
• We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

Benefits for your application:

• Lubricant rationalisation possible due to the product’s multiple uses
• Good water resistance providing increased levels of surface protection when compared to a standard lithium EP 2 grease
• NSF H1 registered supporting process reliability
• ISO 21469 certified – supports the compliance with the hygienic requirements in your production

Application:
Klüberlub NH1 11-222 is used for machines and installations in the food-processing and pharmaceutical industries, especially for applications where incidental contact with the food product cannot be excluded.
Typical applications are for example in rolling and plain bearings, lifting cylinders, joints, guide bars, guide rails, cam discs, seals etc.

Application notes:
Klüberlub NH1 11-222 is applied by brush, spatula, grease gun or grease cartridge.
To ensure perfect hygienic lubrication conditions the lube points have to be cleaned before applying Klüberlub NH1 11-222 for the first time.
If the production process does not allow cleaning, we recommend the existing grease be replaced by purging the system during re-lubrication.

Product data:

NSF-H1 registration	137 536
Chemical composition, thickener	aluminium complex soap
Chemical composition, type of oil	paraffinic mineral oil
Lower service temperature	-15 °C / 5 °F
Upper service temperature	100 °C / 212 °F
Color space	yellow
Texture	homogeneous
Worked penetration, DIN ISO 2137, 25 °C, lower limit value	265 x 0.1 mm
Worked penetration, DIN ISO 2137, 25 °C, upper limit value	295 x 0.1 mm
NLGI grade, DIN 51818	2
Drop point, DIN ISO 2176, IP 396	>= 220 °C
Water resistance, DIN 51807 pt. 01, 3 h/90 °C, rating	<= 1 - 90
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened  original container, approx.	24 months