Klübersynth VR 69-252 N Lubrication valve grease 1kg can

Klübersynth VR 69-252 N Lubrication valve grease 1kg can

€ 91.09 91.09 incl. VAT (76.55 excl. VAT), per piece *

Availability: Available

Packaging unit: 1 piece

Manufacturer: KLUBER

Country of origin: ES/0011

Customs tariff number: 34039900

Weight per piece: 1.2 kg

The product description does not help you?
No problem. Simply fill out the form and we will answer you as soon as possible.

Questions about the product

Title ×

Mr. Ms.

First name ×

Last name ×

e-mail ×

Telephone

Message ×

The fields marked with (×) are required.

Security (ANTI-SPAM)

nine + four = ?

( Examples: two + three = 5, three - five = -2 )

Klübersynth VR 69-252 N is a tailor-made, highly adhesive, light-colored lubricating grease based on fatty oil, calcium soap and PTFE.
With a carefully selected combination of active substances, this lubricant offers very good performance and high functionality combined with a long service life.
Klübersynth VR 69-252 N clearly surpasses the load alternation requirement of 200,000 cycles at a closing force of 2.5 Nm and is therefore in full compliance with the European standard DIN EN 200.
Klübersynth VR 69-252 N meets the new drinking water and plastics guideline (KTW) of the German Umweltbundesamt (Federal Environmental Agency) and conforms to the current French positive list for drinking water applications ACS.
Temperature range: -20°C to +100°C
Volume: Can 1 kg
Also available in: Bucket 5 kg, Bucket 25 kg, Drum 180 kg

Longer component life due to less friction and wear, especially in brass spindle valves.
Prevention of stick-slip at high tightening torques and 500,000 load cycles.
A lubricant for all components meeting all technical, design and chemical requirements, e.g. the BWGL-KTW (UBA- guideline) and the French ACS Guidelines.
Cost-saving as lubricant can be applied by brush or using fully automatic mass application techniques.

Klübersynth VR 69-252 N is used for the lubrication of all friction points in valves subject to mechanical loads and in some cases also for ceramic valves containing EPDM or NBR elastomers.
Further applications are in locking and control valves such as plug or ball valves, flaps, slides or other valves,
and in shower and heating valves and fittings.

Klübersynth VR 69-252 N can be easily applied by means of brush, sponge, spatula, grease gun or other usual metering equipment.

Article number	122730037
Colour space	beige
Density at 20 °C	approx. 0.97 g/cm³
Lower service temperature	-20 °C / -4 °F
Upper service temperature	100 °C / 212 °F
NSF H1 registration number	152147
Flow pressure of lubricating greases, DIN 51805, test temperature: -20 °C	<= 1 400 mbar
Worked penetration, DIN ISO 2137, 25 °C, lower limit value	280 x 0.1 mm
Worked penetration, DIN ISO 2137, 25 °C, upper limit value	310 x 0.1 mm
Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, lower limit	4000 mPas
Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, upper limit	8000 mPas
Copper corrosion, DIN 51811, 24 h, 100°C	1 - 100 - 24 corrosion degree
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.	24 months

Klübersynth VR69-252N, Klübersynth VR 69-252N, Klübersynth VR 69252N

Information on product safety (Manufacturer, Contact)

KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com