English 
Français
Deutsch- ← Previous item
- Pos.-No. 23213795
- Next item →
Klübermatic PRO with Microlube GB 0 Universal lubricant 500ccm
€ 178.44 178.44 incl. VAT (149.95 excl. VAT), per piece *
Availability: on request
Packaging unit: 1 piece
Manufacturer: KLUBER
Country of origin: ES/0011
Customs tariff number: 27101985
Weight per piece: 500 g
No problem. Simply fill out the form and we will answer you as soon as possible.
Klüber MICROLUBE GB 0
- MICROLUBE GB 0 is a specialty grease based on mineral oil. It is highly pressure-resistant, provides excellent wear and corrosion protection, and offers good wettability and water resistance.
Benefits for Your Application
- High-performance universal grease
- High load-carrying capacity
- Excellent wear protection
- Good corrosion protection properties
- Compatible with central lubrication systems
Application Areas
MICROLUBE GB 0 is specifically designed for applications involving high-load friction points and mixed friction conditions. It is used as a universal grease for lubricating eccentric presses (e.g., Müller-Weingarten eccentric presses), highly loaded spur and bevel gears with steel/steel material pairings (e.g., non-oil-tight geared motors), slide and guide rails, as well as sump-lubricated rolling bearings.
Application Instructions
MICROLUBE GB 0 can be applied using a brush, spatula, grease gun, or via central lubrication systems.
Gear lubrication is possible in an oil bath up to circumferential speeds of approximately 3 m/s or in smaller gear units using forced-drop lubrication.
Product Data
| Structure | Homogeneous |
| Color | Red |
| Appearance | Transparent |
| Density at 20°C | Approx. 0.90 g/cm³ |
| Worked Penetration, DIN ISO 2137, 25°C, Lower Limit | 355 x 0.1 mm |
| Worked Penetration, DIN ISO 2137, 25°C, Upper Limit | 385 x 0.1 mm |
| Base Oil Viscosity at 40°C | Approx. 590 mm²/s |
| Base Oil Viscosity at 100°C | Approx. 31.5 mm²/s |
| Shear Viscosity at 25°C | Approx. 3,000 mPas |
| Drop Point, DIN ISO 2176 | > 180 °C |
| Flow Pressure at -25°C, DIN 51805-2 | < 1,400 mbar |
| FZG Wear Test, DIN ISO 14635, A/2,76/50 | >= 12 |
| Minimum Shelf Life (Stored in Dry, Frost-Free Conditions) | 36 months |
Klübermatic Pro Multi-Point Lubrication Systems
Klübermatic PRO MP-6 - Precise battery-operated multi-point lubrication system for up to 6 lubrication points
Depending on the dispensing period (from one day to 24 months), 250 cm³ or 500 cm³ of grease is delivered from up to six outlets to the lubrication point. Thanks to the pressure build-up of up to 25 bar, the grease is distributed directly without pressure loss, even when using hose lines up to 5 m in length.
Klübermatic PRO C MP-6 – Multi-point lubrication system with external control
In addition to the PRO MP-6, the Klübermatic PRO C MP-6 can be operated in an impulse-controlled manner. The lubrication impulse timing can be freely set via a programmable logic controller (PLC). Thanks to the pressure build-up of up to 25 bar, the grease is distributed directly without pressure loss, even when using hose lines up to 5 m in length. The Klübermatic PRO C MP-6 is powered directly by the system and can be controlled and monitored via integration with the PLC.
Klübermatic PRO LINE – Flexible multi-point lubrication system for linear guides
Klübermatic PRO LINE is a specialized multi-point lubrication system for linear guides using grease. The amount of lubricant per outlet is flexible, and the dispensing behavior can be precisely adjusted to meet manufacturer specifications. The PRO Lubricant Container (LC) is available in 250 cm³ or 500 cm³ and supplies lubrication points for up to two years. The high-pressure build-up allows remote mounting using hose lines up to 5 meters per outlet.
Technical Data
| Volume | 500 cm³ |
| Length (L) | 260 mm |
| Diameter (D) | 92 mm |
| Weight (empty) | 1.37 kg |
| Weight (filled with high-performance grease) | 1.82 kg |
| Dispensing time | 1 day to 12 months |
| Dispensing volume per lubrication impulse | 0.5 cm³ |
| Operating temperature range | -20 °C to +60 °C |
| Maximum pressure build-up | 25 bar |
| Maximum hose length (inner diameter 5 mm) | 5 m |
| Compatible lubricants | Greases up to NLGI class 2 |
| Power supply | PRO B battery |
| Emission sound pressure level | < 70 dB(A) |
| Connection thread | G3/8 |
| Protection class | IP 54 |
Hazard Statements (CLP)
Hazard Statements (H-Statements)
- H319: Causes serious eye irritation.
Precautionary Statements (P-Statements)
Prevention:
- P264: Wash skin thoroughly after handling.
- P280: Wear eye protection/face protection.
Response:
- P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P337 + P313: If eye irritation persists: Get medical advice/attention.
Additional Labelling (EUH-Statements)
- EUH208: Contains dibutyl [[bis[(2-ethylhexyl)oxy]phosphinothioyl]thio]succinate. May produce an allergic reaction.
KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com
| Property | GTIN/EAN | MPN (Manufacturer Part Number) |
|---|---|---|
| - | - | MICROLUB-GB-0-PRO500 |
* Price in Euro including VAT, plus forwarding charges.
In parentheses: price in Euro excluding VAT, plus forwarding charges.
Clients outside the EU as well as companies outside of Germany don't pay any VAT (excepting for shipping in Germany)!
Follow us