Klüber STABURAGS NBU 8 EP Rolling bearing high-pressure grease 400g

Klüber STABURAGS NBU 8 EP Rolling bearing high-pressure grease 400g

€ 71.34 71.34 incl. VAT (59.95 excl. VAT), per piece *

Availability: Available

Packaging unit: 1 piece

Manufacturer: KLUBER

Country of origin: AT/0038

Customs tariff number: 34031980

Weight per piece: 450 g

The product description does not help you?
No problem. Simply fill out the form and we will answer you as soon as possible.

Questions about the product

Title ×

Mr. Ms.

First name ×

Last name ×

e-mail ×

Telephone

Message ×

The fields marked with (×) are required.

Security (ANTI-SPAM)

eight + three = ?

( Examples: two + three = 5, three - five = -2 )

Rolling bearing and high-pressure grease

STABURAGS NBU 8 EP is a lubricating grease based on mineral oil and barium complex soap. It has been used successfully for many years as a long-term grease for bearings subject to high specific loads. Its good wear protection properties are enhanced by the barium complex thickener.
STABURAGS NBU 8 EP protects reliably against corrosion and is resistant to water. It meets the requirements of DIN 51 807, dated May 1970: SKF-R2F test, test run B, 140 °C, and it achieves about 4000 operating hours in the SKF-ROF test at 120 °C.
Content: 400g cartridge
Available in 400g cartridge, 1kg can, 25kg bucket

Benefits:

Application:

STABURAGS NBU 8 EP has proven efficient as a rolling bearing and high pressure grease protecting against wear.
It is used in traction motors, journal bearings, electric motors, pumps, and tapered roller bearings.

Application notes:

Product data:

Article number	017105
NLGI grade, DIN 51818	2
NSF-H2 registration	135 684
Chemical composition, type of oil	mineral oil
Chemical composition, thickener	barium complex soap
Lower service temperature	-20 °C / -4 °F
Upper service temperature	140 °C / 284 °F
Color space	brown
Density at 20 °C	approx. 0.99 g/cm³
Worked penetration, DIN ISO 2137, 25 °C, lower limit value	265 x 0.1 mm
Worked penetration, DIN ISO 2137, 25 °C, upper limit value	295 x 0.1 mm
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C	approx. 97 mm²/s
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C	approx. 11.5 mm²/s
Speed factor (n x dm)	approx. 500 000 mm/min
Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value	5 500 mPas
Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value	9 500 mPas
Drop point, DIN ISO 2176	>= 220 °C
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.	60 months