Klüber AMBLYGON TA 15/2 Special grease for longterm lubrication 400g

Special grease for long-term lubrication and high temperatures

• AMBLYGON TA 15/2 is a longterm and hightemperature lubricating grease based on mineral oil and polyurea. This lubricating grease is used for longterm or lifetime lubrication in the machinebuilding sector covering a wide service temperature range up to 150 °C. AMBLYGON TA 15/2 offers good adhesion, resistance to hot and cold water and diluted alkaline and acid solutions.AMBLYGON TA 15/2 is resistant to oxidation and ageing and protects against corrosion.
• Content: 400g cartridge
• Available in 45g tube, 400g cartridge, 1kg can, 25kg bucket

​Benefits for your application:

• Versatile grease for many applications subject to high loads
• Long service life even when exposed to high temperatures or aggressive media
• Long service life due to the high resistance to water and water vapour
• Long service life due to the excellent adhesion to the friction points
• Improved sealing effect due to high adhesion
• Low maintenance due to good corrosion protection

Application:

• AMBLYGON TA 15/2 lubricates bearings and joints subject to high temperatures and loads, for example in:

    -Conveyors
    -Kilns (rotary tubular kilns)
    -Water pumps
    -Hot rollers
    -Tarmac laying machines
    -Gate valves
    -Seals
    -Washing machines and dishwashers
    -Impact mechanism in power tools
    -Joints, hinges
    -King pins
 

• AMBLYGON TA 15/2 is also used in combination with mineraloilresistant elastomer seals.

Application notes:

• Prior to series application we recommend checking compatibility with elastomers, if possible in the component under conditions similar to actual use.

Product data:

Article number	020109
Chemical composition, thickener	polyurea
Chemical composition, type of oil	mineral oil
Lower service temperature	-20°C / -4°F
Upper service temperature	150 °C / 302 °F
Density at 20 °C	approx. 0.93 g/cm³
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C	approx. 220 mm²/s
Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C	approx. 18 mm²/s
Worked penetration, DIN ISO 2137, 25 °C, lower limit value	285 x 0.1 mm
Worked penetration, DIN ISO 2137, 25 °C, upper limit value	315 x 0.1 mm
Speed factor (n x dm)	approx. 350 000 mm/min
Flow pressure of lubricating greases, DIN 51805, test temperature: -20°C	<= 1 400 mbar
Oil separation, DIN 51817 N, after 7 d/40 °C	<= 5 % by weight
Drop point, DIN ISO 2176	>= 220 °C
Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration:  1 week, distilled water	<= 1 corrosion degree
Water resistance, DIN 51807 pt. 01, 3h/90 °C, rating	0 - 90
Minimum shelf life from the date of manufacture in a dry, frostfree place and in the unopened  original container, approx.	60 months