SPAL Shoulder protection for heavy loads

Relieve your shoulders of the weight you are carrying!
Designed on the principle of the kneepad, the shoulder protection SPAL brings comfort and protection to all those who put their shoulders to the test when handling heavy loads.
A robust and lightweight shoulder protection that cushions the direct impact of the load on your shoulder.
You forget that you are carrying it.  
Your body is not a tool that can be easely replaced, keep your musculoskeletal disorders to a minimum.
 

• Padding high density foams     
• S-bust adjustment at XXL     
• Removable cap for reinforcing the base of the neck
• 350 grams total weight
• Anti-slip coating for load maintenance
• Suitable for right-handed and left-handed
• Adjustable fastening loops for adjustment of chest circumference from S to XXL (94 to 126 cm)
• Weight 350 gr.
• Charcoal grey
• Made in France

This PPE is addressed to the majority of building trades such as soliers, tilers, plasterers, masons, carpenters, sealers, chapters, sandblasters, metalworkers, installers (windows, blinds, scaffolding, fences ...), but also the handlers, storekeepers, deliverers (pianos, movers ...), municipal technical teams, etc ...

How to wear it!

1. Wear underwear under SPAL shoulder protection
2. Remove or leave in place the removable neck protection cap as needed
3. Thread the shoulder pad through the arm of the chosen side
4. Adjust the adjustable straps to comfortably maintain the protection without compressing the chest
5. Close the protection using the quick buckles

SPAL material

Shoulder protection

• Anti-slip outer fabric: 100% polyamide 6.6 fabric with silicone coating
• Outer fabric: 100% polyester with PVC coating
• Polyethylene foam
• Lining: polyamide Cordura + polyurethane foam + scratched mesh 100% polyester

Removable cap for the neck

• Outer fabric: 100% polyester with PVC coating
• Lining: polyamide Cordura + polyurethane foam + scratched mesh 100% polyester

Standards

• EC type examination carried out by IFTH (0072) - avenue Guy de Collongue - 69134 ECULLY - France     
• Spal has the EC type examination certificate under No 0072/228/162/10/15/0089.   
• According to an expert opinion based on the essential health and safety requirements of Directive 89/686 / EEC, according to the following performances:     Verification of ergonomics according to EN ISO 13688 (2013): compliant    
• Verification of the safety of materials that may come into direct contact with the skin according to EN ISO 13688 (2013): complies
• Puncture resistance according to EN 14404 + A1 (2010): ≥ 100 N    
• Force distribution according to EN 14404 + A1 (2010): compliant     
• Peak force transmitted according to EN 1621-1 (2013): 10 kN on average 
• Tear resistance of the outer material according to ISO 4674-1 (1997): ≥ 400 N     
• Relative compressive stress-strain characteristic of the foam according to EN ISO 3386-1 (1998): after 5 cycles at 245 N, decrease in thickness ≤ 0.5%