Klübersynth GE 14-151 Special grease for small gears 25kg bucket

Klübersynth GE 14-151 Special grease for small gears 25kg bucket

€ 2557.31 2,557.31 incl. VAT (2,149.00 excl. VAT), per piece *

Availability: Available

Packaging unit: 1 piece

Manufacturer: KLUBER

Country of origin: BE/0017

Customs tariff number: 34031980

Weight per piece: 26.8 kg

The product description does not help you?
No problem. Simply fill out the form and we will answer you as soon as possible.

Questions about the product

Title ×

Mr. Ms.

First name ×

Last name ×

e-mail ×

Telephone

Message ×

The fields marked with (×) are required.

Security (ANTI-SPAM)

seven + four = ?

( Examples: two + three = 5, three - five = -2 )

Klübersynth GE 14-151 is a special grease based on synthetic hydrocarbon oil, ester oil and aluminium complex soap
It offers a wide service temperature range, good wear protection properties and a high scuffing load capacity
Pack size: 25 kg bucket
Also available in: 1 kg can, 50 kg bucket, 180 kg drum

Used for the lubrication of toothed wheels, bearings, joints and slideways in small gears subject to high loads, e.g. in power tools.
Suitable for steel/steel, steel/aluminium and aluminium/aluminium components depending on temperature, load and speed.
Also suitable for trapezoidal and ball-and-screw spindles offering excellent wear protection and smooth running.

Applicable in gears operating at a peripheral speed of approx. 10 m/s with near-complete gear housing fill.
Short-term or intermittent use possible at speeds up to 20 m/s.
Tooth flank lubrication allows a speed of 3 m/s.
Optimized oil separation behaviour makes it usable in gears which are not oil-tight.

Article number	0121190177
Colour space	yellow
Texture	homogeneous, fibrous
Service temperature, lower limit	-35 °C
Service temperature, upper limit	140 °C
Density at 20°C	approx. 0.93 g/cm³
Worked penetration, 25°C, lower limit	320 x 0.1 mm
Worked penetration, 25°C, upper limit	350 x 0.1 mm
Kinematic viscosity of base oil, 40°C	approx. 170 mm²/s
Kinematic viscosity of base oil, 100°C	approx. 20 mm²/s
Drop point	>= 200 °C
FAG FE9, 140°C, 6000 rpm, 1500 N, F50	>= 150 h
Anti-brinelling test wear	approx. 5 mg
Four-ball tester, welding load	>= 4000 N
Minimum shelf life	12 months

Klübersynth GE 14-151, GE14151

Information on product safety (Manufacturer, Contact)

KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, [email protected], www.klueber.com