Klüberbio RM 2-150 Biodegradable oil for stern tubes 200L barrel

Klüberbio RM 2-150 Biodegradable oil for stern tubes 200L barrel

€ 7492.18 7,492.18 incl. VAT (6,295.95 excl. VAT), per piece *

Availability: on request

Packaging unit: 1 piece

Manufacturer: KLUBER

Country of origin: AT/0038

Customs tariff number: 34031980

Weight per piece: 200.0 kg

The product description does not help you?
No problem. Simply fill out the form and we will answer you as soon as possible.

Questions about the product

Title ×

Mr. Ms.

First name ×

Last name ×

e-mail ×

Telephone

Message ×

The fields marked with (×) are required.

Security (ANTI-SPAM)

eight - zero = ?

( Examples: two + three = 5, three - five = -2 )

Klüberbio RM 2 oils are ultimately biodegradable oils for stern tubes based on synthetic ester oil showing good ageing and oxidation stability.
Klüberbio RM 2 oils show a high shear stability and form a strong hydrodynamic oil film even when subject to high loads.
Temperature range: -25°C to +120°C
Volume: 200 l barrel
Also available in: 1 l can, 20 l canister

Comply with the requirements for Environmentally Acceptable Lubricants as defined in Appendix A of the EPA 2013 VGP (Vessel General Permit)
Ultimately biodegradable and not toxic to marine organisms with more than 90% renewable raw materials
High operational reliability due to the formation of a strong, hydrodynamic oil film and a very good compatibility with FKM elastomers available from leading propeller shaft seal manufacturers

Klüberbio RM 2 oils were developed for the lubrication of propeller bushes made of white metal and propeller shaft seals.
Klüberbio RM 2 oils are tested and approved by all leading propeller shaft seal manufacturers.

In general, Klüberbio RM 2 oils are miscible with mineral oil based stern tube lubricants. However, a miscibility test should be performed in order to totally rule out the possibility of an incompatibility between different additives. Prior to changeover, we recommend flushing the stern tube with the Klüberbio RM 2 oil.

Manufacturer number	0090250335
Service temperature, lower limit	-25 °C
Service temperature, upper limit	120 °C
Density, DIN 51757, 20°C	approx. 0.92 g/cm³
Flash point, DIN EN ISO 2592, Cleveland open cup	≥ 250 °C
ISO viscosity grade, DIN ISO 3448, ISO VG	150
Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C	approx. 18 mm²/s
Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C	approx. 150 mm²/s
Viscosity index, DIN ISO 2909	approx. 135

Klüberbio RM2-150, Klüberbio RM 2 150