Klüberbio AG 39-602 N Adhesive lubricant for open gears 1kg can

Klüberbio AG 39-602 N Adhesive lubricant for open gears 1kg can

€ 103.24 103.24 incl. VAT (86.76 excl. VAT), per piece *

Availability: Available

Packaging unit: 1 piece

Manufacturer: Klüber

Country of origin: AT/0038

Customs tariff number: 34039900

Weight per piece: 1.1 kg

The product description does not help you?
No problem. Simply fill out the form and we will answer you as soon as possible.

Questions about the product

Title ×

Mr. Ms.

First name ×

Last name ×

e-mail ×

Telephone

Message ×

The fields marked with (×) are required.

Security (ANTI-SPAM)

one + six = ?

( Examples: two + three = 5, three - five = -2 )

Open gears and steel ropes operating in a maritime environment are subject to extreme loads and requirements. Saline and humid air, strong temperature fluctuations and splash water or constant contact with seawater take their toll on the equipment used.
The high-performance adhesive lubricant Klüberbio AG 39-602 N meets these demanding requirements by its good adhesion to surfaces as well as due to its excellent anticorrosive effect.
Temperature range: -20°C to +120°C
Volume: 1 kg can
Also available in: 25 kg bucket, 180 kg drum

Meets the requirements for Environmentally Acceptable Lubricants (EAL) as defined in Appendix A of the 2013 Vessel General Permit
Long relubrication intervals due to good adhesion and water resistance.
Corrosion protection also under influence of seawater due to specially selected anti-corrosion additives

Klüberbio 39-601 N was developed for the lubrication of open pinion gears on winches and jack-up platforms, as well as steel cables in contact with water.
The product can also be used in other maritime applications that require lubricants to have good water washout resistance, very good anti-corrosion resistance and/or good load-carrying capacity e.g. in low-speed plain bearings, guide rails and open winch gears.

Klüberbio AG 39-601 N can be applied continuously through transfer lubrication with pinion or by brush. Compressed-air lubrication equipment can be used for the lubrication of steel cables. The required lubricant quantity depends on the operating conditions in each individual case.

Colour space	beige
Texture	homogeneous
Chemical composition, type of oil	ester oil
Chemical composition, thickener	calcium soap
Lower service temperature	-20 °C / -4 °F
Upper service temperature	120 °C / 248 °F
Density at 20 °C	approx. 0.95 g/cm³
Drop point, DIN ISO 2176, IP 396	>= 130 °C
Biodegradability in acc. with OECD 301 B, 28d	>= 60 %
Flow pressure of lubricating greases, DIN 51805, test temperature: -20 °C	<= 1 400 mbar