SurTec OKS 510 MoS2 bonded coating fast-drying 500g tin

SurTec OKS 510 MoS2 bonded coating fast-drying 500g tin

€ 89.19 89.19 incl. VAT (74.95 excl. VAT), per piece *

Availability: Available

Packaging unit: 1 piece

More…

Manufacturer: SurTec

Country of origin: DE/0004

Customs tariff number: 34039900

Weight per piece: 600 g

Recommend this product

Questions about the product

The product description does not help you?
No problem. Simply fill out the form and we will answer you as soon as possible.

Questions about the product

Title ×

Mr. Ms.

First name ×

Last name ×

e-mail ×

Telephone

Message ×

The fields marked with (×) are required.

Security (ANTI-SPAM)

three - one = ?

( Examples: two + three = 5, three - five = -2 )

Sur Tec OKS 510 is an air-drying MoS₂-based lubricant coating used for dry lubrication of machine elements during temporary operation and long standstill periods.

Field of application

Run-in lubrication in combination with oil or grease lubrication
Dry lubrication at sliding pairs, in particular under heavy loads and low sliding speeds, at oscillating movements or intermittent operation
Dry lubrication at high operating temperatures (up to 450°C), shorter sliding paths and low speeds
Dry lubrication in dusty environment, to avoid adhesions
Coating of punching tools

Properties

Highly effective due to good adhesion to prepared substrates
Allows a low coefficient of sliding friction also under heavy loading
Increased wear protection
Radiation and vacuum-resistant
Shortens and improves run-in conditions of friction bearings, toothings and other sliding pairs
Also available as spray version OKS 511

Technical Data

Lower operating temperature: -180°C
Upper operating temperature: 450°C
Flashing point < 65 (< 5°C): -30°C
Surface covering: 10-50 m²/can
Density (at 20°C): 0.96 g/cm³
Colour: grey-black
Size: 500g
Packaging type: tin
Also available in: 5kg hobbock, 25kg hobbock and 400ml spray can (OKS 511)

Industries

Iron and steel industry
Rubber and plastic processing
Chemical industry
Logistics
Paper and packaging industry
Rail vehicle technology
Glass and foundry industry
Plant and machine (tool) engineering
Municipal services
Shipbuilding and marine technology

Hazard Information (CLP)

Signal word: Danger.

Hazard Statements (H-phrases)

H225: Highly flammable liquid and vapour.
H304: May be fatal if swallowed and enters airways.
H315: Causes skin irritation.
H318: Causes serious eye damage.
H336: May cause drowsiness or dizziness.
H411: Toxic to aquatic life with long lasting effects.

Precautionary Statements (P-phrases)

Prevention:

P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P261: Avoid breathing vapours.
P273: Avoid release to the environment.
P280: Wear protective gloves/ eye protection/ face protection.

Response:

P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER/doctor.
P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310: Immediately call a POISON CENTER/doctor.
P331: Do NOT induce vomiting.
P370 + P378: In case of fire: Use dry sand, dry chemical or alcohol-resistant foam to extinguish.

Storage:

P403 + P235: Store in a well-ventilated place. Keep cool.

Hazardous Components:

Naphtha (petroleum), hydrotreated light; Low boiling point hydrogen treated naphtha
Butan-1-ol

Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,

Information on product safety (Manufacturer, Contact)

OKS Spezialschmierstoffe GmbH, Ganghoferstr. 47, D-82216 Maisach-Gernlinden, +49 8142 3051 500, [email protected], www.oks-germany.com

oks-510-mos2-bonded-coating-fast-drying-tds-datasheet-en.pdf (373.69 KB)