OKS 2301 Mould protector for metal surfaces Spray 400ml spray can

Field of application

• Preservation of bare metal surfaces of all kinds, which are stored for longer periods and are subject to effects of weathering
• Protected parts retain their decorative appearance, as no surface discolouration occurs
• Ideal on-call and storage protection for spare parts with possibility of direction installation

Properties

• Highly effective due to good film-forming properties with lasting water-repelling effect
• Excellently suited for producing non-slip dry, greenish protective films
• Outstanding corrosion and oxidation protection with lubricating effect
• No removal prior to commissioning, as compatible with all lubricants
• Waterproof
• Resistant to weathering, suitable for all climate zones
• Can be welded without degreasing
• Easily removable before coating

Technical Data

• Solvent: special boiling point gasoline
• Solid lubricants: synthetic wax
• Additives: corrosion protection
• Temperature range: -40°C to +70°C
• Salt spray test: > 1,000 h with 50 µm layer thickness
• Volume: 400 ml
• Packaging type: spray can
• Also available in: 5l canister, 25l canister, 200l barrel (OKS 2300)

Industries​

• Plant and machine (tool) engineering
• Chemical industry
• Rubber and plastic processing
• Paper and packaging industry
• Glass and foundry industry
• Shipbuilding and marine technology
• Logistics
• Municipal services
• Rail vehicle technology
• Iron and steel industry

Hazard Information (CLP)

Hazard Statements (H-Sentences)

• H222: Extremely flammable aerosol.
• H229: Pressurized container: May burst if heated.
• H304: May be fatal if swallowed and enters airways.
• H336: May cause drowsiness or dizziness.
• H411: Toxic to aquatic life with long-lasting effects.

Additional Hazard Information

• EUH066: Repeated exposure may cause dry or cracked skin.

Precautionary Statements (P-Sentences)

Prevention:

• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P211: Do not spray on an open flame or other ignition source.
• P251: Do not pierce or burn, even after use.
• P273: Avoid release to the environment.

Response:

• P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER/ doctor.
• P331: Do not induce vomiting.

Storage:

• P410 + P412: Protect from sunlight and do not expose to temperatures exceeding 50°C/122°F.

Additional Labeling

• EUH208: Contains Calcium bis(dinonylnaphthalene sulfonate). May cause allergic reactions.

OKS Spezialschmierstoffe GmbH, Ganghoferstr. 47, D-82216 Maisach-Gernlinden, +49 8142 3051 500, [email protected], www.oks-germany.com