Hylo® Clean spray remover for Hylomar jointing compound 400ml

• Hyloclean is a specially blended fluid that is highly effective at removing used Hylomar jointing compound from disassembled joint surfaces.
• The unique mix of solvents also make it perfect for cleaning and degreasing surfaces prior to use with any of Hylomar’s range of adhesive and sealants.
• Hyloclean is also very effective at removing uncured anaerobic, uncured silicone and uncured epoxy products.
• Highly effective at removing most Hylomar products
• Also can be used for cleaning and degreasing surfaces
• Does not leave a residue
• Evaporates quickly after application

Typical Applications:

• Removing Hylomar M, Universal Blue, Advanced Formula and Aerograde, uncured Hylogrip anaerobic product, Hylobond, acrylic adhesives and Hylotyte Red
• Degreasing metal components – will remove most oils, lubricating fluids, metal cuttings and dirt from any metal surface Hyloclean does not leave a residue and evaporates quickly after application

INSTRUCTIONS FOR USE
For the removal of used Hylomar jointing compound:

• Spray HYLO®CLEAN liberally onto the used Hylomar jointing compound. Immediately wipe away the residue with a cloth.

For cleaning surfaces prior to adhesive or sealant application:

• Spray HYLO®CLEAN liberally onto the surface of the component to be bonded or sealed, wipe clean using a cloth. Leave plenty of time for the solvent to evaporate
• before applying the sealant or adhesive.
• To remove excess sealant or adhesive from the joint after assembly, liberally spray the cleaner onto a cloth and wipe away the excess.
• Take care when spraying directly onto an assembled component as the solvent may get into the joint itself and damage the seal.
• Care should also be taken around painted and some plastic components as the solvent can discolour and soften paints and plastics
• Volume – 400ml aerosol

Label according to Regulation (EC) No. 1272/2008 as amended
Contains: Acetone
Hazard pictograms

Signal word Danger
Hazard statements
H222 Extremely flammable aerosol.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
Precautionary statements
Prevention
P210 Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
Response
P312 Call a POISON CENTRE or doctor/physician if you feel unwell.
Storage
P410 + P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122°F.
Disposal
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.
Supplemental label information EUH066 - Repeated exposure may cause skin dryness or cracking.

 

Information on product safety (Manufacturer, Contact)

HYLOMAR GMBH, Talstraße 106, 41516 Grevenbroich, GERMANY, +49 2182 5708971, [email protected], www.hylomar.com/de