Klübersynth GE 4 80 W 140 Synthetic high-performance gear oil 5L

Klübersynth GE 4 80 W 140 Synthetic high-performance gear oil 5L

€ 318.25 318.25 incl. VAT (267.44 excl. VAT), per piece *

Availability: on request

Packaging unit: 1 piece

Manufacturer: KLUBER

Country of origin: DE/0004

Customs tariff number: 34039900

Weight per piece: 5.0 kg

The product description does not help you?
No problem. Simply fill out the form and we will answer you as soon as possible.

Questions about the product

Title ×

Mr. Ms.

First name ×

Last name ×

e-mail ×

Telephone

Message ×

The fields marked with (×) are required.

Security (ANTI-SPAM)

five + three = ?

( Examples: two + three = 5, three - five = -2 )

Klübersynth GE 4 80 W 140 is a fully synthetic high-performance gear oil based on polyalphaolefin (PAO) offering high stability and protection even under shock loads.
It was especially developed for rail vehicle gearboxes operating under high loads. The product is based on Klübersynth GE 4 75 W 90, which has been tried and tested on the market and is approved by many OEMs. Its viscosity, however is higher: SAE 80 W 140.
Klübersynth GE 4 80 W 140 offers a very high scuffing load capacity of API GL-5 and can therefore be used in gearboxes requiring API GL-4 or API GL-5. The excellent wear protection of both gears and rolling bearings ensures a long service life of the lubricated components, leading to lower maintenance costs. The oil's high micropitting resistance of GFT ≥ 10 according to FVA 54/7 offers sufficient protection to gears that are subject to high loads and would normally be susceptible to this type of damage. The product's low foaming tendency and anti-corrosive properties enable problem-free gear operation.
Temperature range: -30°C to +150°C
Volume: 5L

Klübersynth GE 4 80 W 140 was especially developed for the lubrication of spur, bevel and hypoid gears with maximum antiwear and lifetime requirements even under shock loads. It may be used in drive units for rail vehicles, industrial robots, textile machines or metalforming presses

The oil can be applied by means of immersion, immersion circulation or injection lubrication. Drip-feed lubrication as well as application by brush, oil can or automatic lubricating systems are also possible.

Lower service temperature	-30 °C
Upper service temperature	150 °C
Colour space	yellow
Density, DIN 51757, 20 °C	ca. 0,87 g/cm³
Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C	ca. 250 mm²/s
Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C	ca. 30 mm²/s
Pour point, DIN ISO 3016	<= -35 °C
SAE-viscosity grade	80 W 140
Viscosity index, DIN ISO 2909	>= 150
Four-ball EP tester, welding load, DIN 51350 part 2	>= 3000 N
Flash point, DIN EN ISO 2592, Cleveland, open-cup apparatus	>= 200 °C