Motorex COOL-CORE FLUID Coolant additive for motor spindle systems 5L

Motorex COOL-CORE FLUID is used as an anti-corrosion additive in motor spindle cooling systems. The substances it contains passivate the various materials and provide long-term protection against corrosion. COOL-CORE FLUID is particularly useful for problem-free cooling of drive shafts where high-power fast-turning motor spindles are used. The additive can naturally also be used in systems that operate under less heavy loads.

Application

• Only drinking water is acceptable for use when preparing COOL-CORE FLUID and this water must not exceed the following limits:
  • Water hardness 3.6 mmol/l 
  • Chloride 100 ppm 
  • Sulphate 100 ppm
• Mix one part of COOL-CORE FLUID with two parts (1/3:2/3) of drinking water. Only use clean containers for preparing the mixture. Pour the mixture into the prepared cooling system immediately.
• If these values are outside the permissible range, COOL-CORE READY must be used. Where the fluid is used in optimum conditions and the instructions for use are complied with, the coolant can remain in use for up to four years.
• Important: Galvanised components or similar materials must not be used either in the cooling system or in the mixing or storage containers. An average operating temperature of 20-25°C will provide very effective long-term protection for elastomers. These advantageous conditions can be obtained using a cooling unit that will stabilise the temperature. 

Characteristics

• Prevents electrochemical corrosion 
• Protects aluminium, ferrous and non-ferrous metals 
• Low-maintenance 
• Long-term protection 
• Size: 5l
• Packaging type: canister
• Also available in: 20l canister, 200l barrel

Technical specifications