Castrol Molub-Alloy Paste PL Assembly paste MoS2 black 1kg can

Castrol MOLUB-ALLOY™ PASTE PL (previously named Optimol™ Paste PL) is a black assembly paste with MoS2 especially suited for highly loaded sliding surfaces as well as for base and thin-film lubrication at high pressures and temperatures.

For larger surfaces and lubricating points with difficult access such as bore holes, threads and gear rims we recommend the use of MOLUB-ALLOY PASTE PL SPRAY.

Application

• For screw connections, press and snug fits at high temperatures up to + 600°C/+ 1112°F
• For sliding bearings, bushes and toothed wheels.
• On drive trains in the automotive industry.
• For base lubrication of slide ways, guides and joints.
• For good separation of tool and work piece during hot shaping of metals.
• Temperature application range: - 30°C/- 22°F up to about + 450°C/+ 842°F (in case of reduced air supply up to +600°C/+ 1112°F)

Advantages

• OPTITEC™ - MOLUB-ALLOY technology. Wide range of applications.
• Immediate lubricating effect. Easy spray application.
• Economical in use. Thermally stable.
• Excellent emergency running properties due to especially selected solid lubricants. Maximum load carrying capacity.
• Extremely low coefficient of friction. Good corrosion protection.
• Prevents fretting corrosion. Good adhesion and separation. Prevents stick-slip.

Technical specifications

• Colour: Grey-Black
• Base: Grease-like carrier/MoS2 and solid lubricants with synergetic effect/mineral oil
• Worked Penetration (60 strokes @ 25°C / 77°F) 0.1 mm 265 - 295
• Density @ 20°C / 68°F Inhouse method kg/m³: 1500
• Base Oil Viscosity @ 40°C / 104°F mm²/s: 94.0
• Erichsen Screw test, total friction: 0.07
• Volume: 1kg can
• Also available as: 400ml spray can, 7kg can
• GLIS number: 15B6B8 or 15FBEC
• MSDS code: 468642