Klübersynth HB 74-401 Synthetic high temperature grease 370g

Klübersynth HB 74-401 Synthetic high temperature grease 370g

€ 47.99 47.99 incl. VAT (40.33 excl. VAT), per piece *

Availability: In Stock - shipping immediately

Packaging unit: 1 piece

Manufacturer: KLUBER

Country of origin: ES/0011

Customs tariff number: 34039900

Weight per piece: 450 g

The product description does not help you?
No problem. Simply fill out the form and we will answer you as soon as possible.

Description

Klübersynth HB 74-401 is a lubricating grease based on a high-quality synthetic base oil thickened with a polyurea.
This combination enables long-term lubrication over a wide temperature range.
In addition, good wear protection under high loads is achieved due to the high base oil viscosity and special additives.

Benefits for your application

Extended component life due to good wear and corrosion protection
Cost reduction possible due to longer relubrication intervals, even at higher temperatures, based on the synthetic grease concept
Type reduction possible due to the versatile usability over a wide temperature range

Application areas

Klübersynth HB 74-401 is primarily used in roller and plain bearings at high temperatures, e.g. in the steel or cement industry.

Possible areas of application:

Application Notes

Klübersynth HB 74-401 can be applied with a spatula, brush and grease gun or with standard central lubrication systems.
Ideally, before greasing with Klübersynth HB 74-401, the lubricating point should be cleaned and the old grease removed.
If it is not possible to clean the lubrication point for technical reasons, the grease can be replaced by more frequent relubrication in the initial period after the changeover.

Article number	004282
Colour space	beige
Texture	homogeneous
Texture	fibrous
Lower service temperature	-40 °C
Upper service temperature	200 °C
NLGI grade, DIN 51818	1
Density at 20 °C	approx. 0.85 g/cm³
Drop point, DIN ISO 2176, IP 396	>= 220 °C
Flow pressure of lubricating greases, DIN 51805, test temperature: -55 °C	<= 1 400 mbar
Worked penetration, DIN ISO 2137, 25 °C, lower limit value	310 x 0.1 mm
Worked penetration, DIN ISO 2137, 25 °C, upper limit value	340 x 0.1 mm
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C	approx. 24 mm²/s
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C	approx. 4.6 mm²/s
Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water	<= 1 corrosion degree
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.	36 months