Klübertemp GR M30 High viscosity long-term grease white 10kg hobbock

Klübertemp GR M30 Long-term greases based on perfluorinated polyether | N° 090177

• Klübertemp GR M greases are white, odourless, long-term greases based on perfluorinated polyether (PFPE) oils and polytetrafluoroethylene (PTFE) thickener.
• The extremely high viscosity index, i.e. the very flat viscosity curve of the base oils, allows excellent sliding friction properties across a wide service temperature range. Klübertemp GR M greases show a neutral behaviour towards most plastics and elastomers and can therefore be used for a variety of component materials.
• Content: 10kg bucket

Benefits for your application

• Long component life
  • Over a wide service temperature range
  • In contact with aggressive media
  • WWwhere sensitive plastic materials are used

Application

• Klübertemp GR M greases are preferably used for the lubrication of electromechanical actuators, small gears and seals where they show low breakaway torques, exceptionally low friction values as well as a reduced tendency to stickslip.This leads, for example, to lower frictional heating of elastomers subject to dynamic loads and hence longer component life.

Application note

• For optimum lubrication results, we recommend cleaning the friction points with white spirit 180/210 followed by Klüberalfa XZ 3-1. Then blow the surfaces with clean, dry air or hot air to remove solvent residues.
• For initial lubrication, the friction points must be clean and bright, i.e. free from oil, grease, perspiration and contamination. Klübertemp GR M greases may be applied directly or by means of brush, spatula or lubricant dispenser.

Technical specifications