Klüber POLYLUB GLY 791 Special synthetic lubricating grease 400g

Klüber POLYLUB GLY 791 Special synthetic lubricating grease 400g

pics/Kluber/Copyright EIS/cartridge/POLYLUB GLY 791/kluber-polylub-gly-791-special-synthetic-lubricating-grease-400g-002.jpg
  • pics/Kluber/Copyright EIS/cartridge/POLYLUB GLY 791/kluber-polylub-gly-791-special-synthetic-lubricating-grease-400g-002.jpg
  • pics/Kluber/Copyright EIS/cartridge/POLYLUB GLY 791/kluber-polylub-gly-791-special-synthetic-lubricating-grease-400g-001.jpg
  • pics/Kluber/klueber_logo.jpg

107.04 107.04 incl. VAT (89.95 excl. VAT), per piece *

Availability: In Stock - shipping immediately

Packaging unit: 1 piece

Manufacturer: KLUBER

Country of origin: AT/0038

Customs tariff number: 34031980

Weight per piece: 400 g

Please give the recipient email address, as well as your name and email address.

Recipient
Sender

The fields marked with (×) are required.
Security (ANTI-SPAM)
( Examples: two + three = 5, three - five = -2 )
The product description does not help you?
No problem. Simply fill out the form and we will answer you as soon as possible.

Questions about the product

The fields marked with (×) are required.
Security (ANTI-SPAM)
( Examples: two + three = 5, three - five = -2 )

Special synthetic lubricating grease for plain bearings subject to high loads and temperatures

  • POLYLUB GLY 791 is based on a synthetic hydrocarbon oil, mineral oil and special lithium soap. It has been designed for friction reduction and wear protection of plain bearings and slideways with metal/metal or plastic/metal material pairings.
  • This special lubricant covers a wide range of operating conditions, from low to high speeds and loads, even in the case of fibre-reinforced plastic components and metal/plastic sliding pairings.
  • The lubrication of plastics is special in a number of ways . As the behaviour of metals and plastics differs in many aspects, the lubricant’s properties have to be adjusted to the plastic. Compared to many metals, plastics are relatively soft. Solid lubricants, which may achieve a positive effect on many metal friction points, can have a negative or no effect at all on plastic lube points. With the formulation of POLYLUB 791, Klüber Lubrication offers a product which is free of solid lubricant, but covers the many operating conditions mentioned above.
  • Owing to the many different plastic compositions, however, we recommend checking their compatibility particularly prior to series application.
  • Content: 400g cartridge
  • Available in 400g cartridge, 1kg can, 25kg bucket

Benefits for your application

  • For metal/metal and plastic/steel material pairings
  • Neutral towards many plastics and elastomers
  • Provides good wear protection to fibre-reinforced plastics
  • Good corrosion protection of metal mating surfaces

Application

  • Vehicles: Seat mechanisms, shock absorbers
  • Slideways, plain bearings: For many types of plain bearing designs. POLYLUB GLY 791 prevents stick-slip to a large extent, particularly in applications where normally a hydrodynamic film cannot form.
  • Owing to the good damping properties, noise and cracking is considerably reduced.

Application notes

  • POLYLUB GLY 791 is applied by brush, spatula or automatic metering systems. The use of central lubrication systems is possible in principle but should be checked in each individual case.
Product data
 
 NLGI grade, DIN 51818 1
 Lower service temperature -40 °C / -40 °F
 Upper service temperature 150 °C / 302 °F
 Color space orange
 Worked penetration, DIN ISO 2137, 25 °C, lower limit value 310 x 0.1 mm
 Worked penetration, DIN ISO 2137, 25 °C, upper limit value 340 x 0.1 mm
 Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value 9 000 mPas
 Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value 6 500 mPas
 Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration:
 1 week, distilled water
 <= 1 corrosion degree
 Drop point, DIN ISO 2176 >= 230 °C
 Oil separation, based on ASTM D 6184 [FTMS 791 C 321] after 30 h/150 °C <= 9 % by weight
 Four-ball tester, wear factor, DIN 51350 pt. 05, 1 h/400 N, wear scar diameter <= 0.9 mm
 Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened
 original container, approx.
 36 months
Klüber POLYLUB GLY791

Property GTIN/EAN MPN (Manufacturer Part Number)
- - 943150939

 

Related products

* Price in Euro including VAT, plus forwarding charges.
In parentheses: price in Euro excluding VAT, plus forwarding charges.
Clients outside the EU as well as companies outside of Germany don't pay any VAT (excepting for shipping in Germany)!

 

 Shopping Cart    
Your shopping cart is empty
 Log in    

Password forgotten

Register

Distributor Login

Password forgotten

Register

 Transport    
forwarders
With package tracking
Shipping in 164 countries!
 Payment    
     
Prepayment using bank transfer => discount on all items of 2% Payment on invoice using bank transfer
 Follow us