Flex 532.023 GE7 Giraffe sander + VCE 33 M AC Vacuum cleaner Set

532.023 GE7 Giraffe sander + MH-R + sandpaper + VCE 33 M AC Vacuum cleaner 

GE 7 Giraffe® wall and ceiling sander with interchangeable head system 

• Electronic: controlled constant speed, soft-start, overload protection and speed selection with adjuster wheel
• Very handy, light-weight machine with optimum ease of operation. Provides comfortable and ergonomic working conditions
• Fitted with innovative interchangeable head system. Sanding heads are attached and removed with a click
• Segment sanding head with rotatable edge segment. This allows the sanding of surface transitions from wall to wall and wall to ceiling.
• The head's rotation follows the movement of the machine, without interruption of work.
• Easy guiding: by optimal balance between motor and sanding head
• Option of connecting the FLEX safety vacuum cleaners to the FLEX clip-system on the guide tube
• For detailed information view our datasheet here

Technical specifications

• Power input: 710 watt
• Power output: 410 watt
• No load speed: 1100-1650 rpm
• Sanding disc Ø: 225 mm
• Tool fixture: velcro
• Tilt angle on the head: 100 °
• Cable length: 5,0 m
• Length: 1520 mm
• Weight: 4,2 kg

Hook-and-loop sanding paper (perforated) D225 PF-P80/100/120/150 

• Grit   80: For removing paint and paste
• Grit 100: For rapid sanding and smoothing
• Grit 120: For rapid sanding and smoothing
• Grit 150: For universal sanding
• Dimensions in mm: 225 Ø
• QTY/PKG: 4 x 25

• Adapter plate for fixing L-BOXXes and Tanos systainers on the head of the vacuum cleaner
• The high-performance turbine ensures both a high suction capacity and a high vacuum. The outcome is an excellent extraction result
• Continuous automatic flat filter cleaning ensures no loss of suction
• The flat-fold filter with Teflon coating / nanocoating allows optimum use of the tank volume
• With permanent socket and electronic automatic on/off switch
• Flow sensor technology monitors the flow rate and emits a visual and audible signal to indicate any drop below the statutory minimum value of ≤ 20m/s
• The flow rate control via the rotary switch minimises possible vacuums on the surface during intermediate and finish sanding
• Suction diameter selector switch for adjusting the optimum flow rate
• Suitable for wet vacuuming: with electronic liquid level control
• Soft start stops any voltage peaks at the start and the run-on feature (15 sec. overrun) empties any remaining dust in the vacuum hose
• Double-walled sturdy container with integrated grip recess for emptying the container easily
• Dust-protected antistatic finish prevents electric charging of the suction hose
• Equipped with large wheels and two swivel guide rollers made of metal
• Separate motor air cooling duct with coarse dirt filter. Protects the turbine against the ingress of ambient air and thereby extends the service life. (Fine dust filter PES available as an accessory)
• Simple filter change without removing the suction head
• With hose retainer and expander for easy, quick securing of the power cable
• With 4 clamping loops (2 on each side ) for attaching straps and a giraffe holder
• Recommendation: When working with a filter bag turn off the automatic cleaning system. When using a disposable bag leave the system on
• Class M safety vacuum cleaner, suitable for all dusts with OEL values ≥ 0.1 mg/m³. Specifically for mineral and timber dusts (also beech and oak)

• Power input P. max. 1200 watt
• Max. volume flow 4500 l/min
• Max. vacuum 25000 Pa
• Filter surface 5000 cm²
• Container volume 30 l
• Liquid capacity 17 l
• Power take off 100-2400 watt
• Cable length 7,5 m
• Size (W x L x H) 565 x 385 x 565 mm
• Weight 15,2 kg