Klüber BARRIERTA L 55/2 High-temperature long-term grease 1kg
€ 1268.54 1,268.54 incl. VAT (1,066.00 excl. VAT), per unit *
Availability: shipping in 1-2 weeks
Packaging unit: 1 piece
Country of origin: AT/0038
Customs tariff number: 3403990
Weight per unit: 1.0 kg
No problem. Simply fill out the form and we will answer you as soon as possible.
Klüber BARRIERTA L 55/2 - High-temperature long-term grease - 1 Kg
Rolling and plain bearings subject to high temperatures.
One of the wellknown strengths of the BARRIERTA L 55 series is the products' suitability for the lubrication of bearings and guides operating under extreme temperatures. A low evaporation rate enables longest grease lives and hence longest relubrication intervals.
Typical applications include:
- Conveyors (load and turn rollers)
- Kiln cart wheel bearings
- Calender bearings
- Fan bearings
- Chain bearings in film stretching stenters
BARRIERTA L 55/2 is most frequently used for initial and longterm lubrication. For relubrication softer grades of NLGI class 1 or lower are recommended.
Friction points under the influence of media:
BARRIERTA L 55 greases offer exceptionally long service lifetimes even when exposed to any of a large number of aggressive media such as concentrated acids, lyes, organic solvents or gases.
In addition to its resistance to media, BARRIERTA L 55/2 offers also good adhesion and a sealing effect, which makes it suitable for application in:
- Valves, fittings and installations e.g. in the chemical industry
- Pneumatic components
- Level gauges, e.g. for fuels or chemicals
- Seals (static, dynamic)
- Extraction systems
Foodprocessing and pharmaceutical industries:
All BARRIERTA L 55 greases are registered as NSFH1 and are therefore in compliance with FDA 21 CFR § 178.3570.
The additional certification according to ISO 21469 supports the compliance with the hygienic requirements in your production plant.
Whitecolored BARRIERTA L 55 special lubricants can therefore also be used on friction points where incidental contact with food products cannot be ruled out for technical reasons, e.g. in rolling and plain bearings and guides operating under high thermal loads in:
- Automatic baking ovens
- Cooking or frying lines
- Conveyor systems
Plasticplastic friction points:
BARRIERTA L 55 greases – irrespective of NLGI grade are neutral towards the majority of plastic materials. Results of pertinent tests with fluoroelastomers can be found overleaf.
We recommend testing lubricant compatibility with the materials in question prior to series application.
For optimum results we recommend cleaning all friction points with white spirit 180/210 and then with Klüberalfa XZ 31 prior to initial lubrication. Subsequently, the friction points should be dried with clean dry compressed air or hot air to remove all solvent residues.
The friction point must be free from oil, grease, perspiration and contamination particles before initial lubrication.
|NSF-H1 registration||129 400|
|Chemical composition, type of oil||PFPE|
|Chemical composition, solid lubricant||PTFE|
|Lower service temperature||-40 °C / -40 °F|
|Upper service temperature||260 °C / 500 °F|
|Density at 20 °C||approx. 1.96 g/cm³|
|NLGI grade, DIN 51818||2|
|Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value||8 000 mPas|
|Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value||12 000 mPas|
|Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C||approx. 420 mm²/s|
|Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ ASTM D 7042, 100 °C||approx. 40 mm²/ s|
| Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR),|
test duration: 1 week, distilled water
|<= 1 corrosion degree|
|Flow pressure of lubricating greases, DIN 51805, test temperature: -40°C||<= 1 600 mbar|
|Fourball tester, welding load, DIN 51350 pt. 04||>= 8 000|
|Speed factor (n x dm)||approx. 300 000 mm/min|
| Minimum shelf life from the date of manufacture in a dry, frostfree|
place and in the unopened original container, approx.
No files available for download
|Property||GTIN/EAN||MPN (Manufacturer Part Number)|
* Price in Euro including VAT, plus forwarding charges.
In parentheses: price in Euro excluding VAT, plus forwarding charges.
Clients outside the EU as well as companies outside of Germany don't pay any VAT (excepting for shipping in Germany)!