Klüber BARRIERTA L 55/2 - High-temperature long-term greases - 800g

Klüber BARRIERTA L 55/2 - High-temperature long-term greases - 800g

pics/Kluber/klüber_global.jpg

1059.1 1,059.10 incl. VAT (890.00 excl. VAT), per unit *

Availability: shipping in 3-5 working days

Packaging unit: 1 piece

Manufacturer: KLUBER

Country of origin: AT/0038

Customs tariff number: 3403990

Weight per unit: 800 g

Please give the recipient email address, as well as your name and email address.

Recipient
Sender

The fields marked with (×) are required.
Security (ANTI-SPAM)
( Examples: two + three = 5, three - five = -2 )
The product description does not help you?
No problem. Simply fill out the form and we will answer you as soon as possible.

Questions about the product

The fields marked with (×) are required.
Security (ANTI-SPAM)
( Examples: two + three = 5, three - five = -2 )


Application:

Rolling and plain bearings subject to high temperatures.
One of the wellknown strengths of the BARRIERTA L 55 series is the products' suitability for the lubrication of bearings and guides operating under extreme temperatures. A low evaporation rate enables longest grease lives and hence longest relubrication intervals.

Typical applications include:

- Conveyors (load and turn rollers)
- Kiln cart wheel bearings
- Calender bearings
- Fan bearings
- Chain bearings in film stretching stenters

BARRIERTA L 55/2 is most frequently used for initial and longterm lubrication. For relubrication softer grades of NLGI class 1 or lower are recommended.

Friction points under the influence of media:

BARRIERTA L 55 greases offer exceptionally long service lifetimes even when exposed to any of a large number of aggressive media such as concentrated acids, lyes, organic solvents or gases.
In addition to its resistance to media, BARRIERTA L 55/2 offers also good adhesion and a sealing effect, which makes it suitable for application in:

- Valves, fittings and installations e.g. in the chemical industry
- Pneumatic components
- Level gauges, e.g. for fuels or chemicals
- Seals (static, dynamic)
- Extraction systems

Foodprocessing and pharmaceutical industries:

All BARRIERTA L 55 greases are registered as NSFH1 and are therefore in compliance with FDA 21 CFR § 178.3570.
The additional certification according to ISO 21469 supports the compliance with the hygienic requirements in your production plant.
Whitecolored BARRIERTA L 55 special lubricants can therefore also be used on friction points where incidental contact with food products cannot be ruled out for technical reasons, e.g. in rolling and plain bearings and guides operating under high thermal loads in:

- Automatic baking ovens
- Cooking or frying lines
- Conveyor systems

Plasticplastic friction points:

BARRIERTA L 55 greases – irrespective of NLGI grade are neutral towards the majority of plastic materials. Results of pertinent tests with fluoroelastomers can be found overleaf.
We recommend testing lubricant compatibility with the materials in question prior to series application.

Application notes:

For optimum results we recommend cleaning all friction points with white spirit 180/210 and then with Klüberalfa XZ 31 prior to initial lubrication. Subsequently, the friction points should be dried with clean dry compressed air or hot air to remove all solvent residues.
The friction point must be free from oil, grease, perspiration and contamination particles before initial lubrication.

Product data:

 NSF-H1 registration 129 400
 Chemical composition, type of oil PFPE
 Chemical composition, solid lubricant PTFE
 Lower service temperature -40 °C / -40 °F
 Upper service temperature 260 °C / 500 °F
 Color space white
 Density at 20 °C approx. 1.96 g/cm³
 NLGI grade, DIN 51818 2
 Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value 8 000 mPas
 Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value 12 000 mPas
 Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 420 mm²/s
 Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ ASTM D 7042, 100 °C approx. 40 mm²/ s
 Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR),
 test duration: 1 week, distilled water
 <= 1 corrosion degree
 Flow pressure of lubricating greases, DIN 51805, test temperature: -40°C <= 1 600 mbar
 Fourball tester, welding load, DIN 51350 pt. 04 >= 8 000
 Speed factor (n x dm) approx. 300 000 mm/min
 Minimum shelf life from the date of manufacture in a dry, frostfree
 place and in the unopened original container, approx.
 60 months


No files available for download

Property GTIN/EAN MPN (Manufacturer Part Number)
- 0725175310647 943150316

 

Related products

* Price in Euro including VAT, plus forwarding charges.
In parentheses: price in Euro excluding VAT, plus forwarding charges.
Clients outside the EU as well as companies outside of Germany don't pay any VAT (excepting for shipping in Germany)!

 

 Shopping Cart    
Your shopping cart is empty
 Login    

Forgot your password?

Register

Distributor Login

Forgot your password?

Register

 Transport    
forwarders
With package tracking
Shipping in 125 countries!
 Payment    
     
Prepayment using bank transfer => discount on all items of 2% Payment on invoice using bank transfer
 QR-Code