DRUCK DPI 705E Digital pressure gauge with internal sensor 20bar

DRUCK DPI 705E Digital pressure gauge with internal sensor 20bar

pics/ge/druck-dpi-705e-digital-pressure-gauge.jpg
  • pics/ge/druck-dpi-705e-digital-pressure-gauge.jpg
  • pics/ge/druck-dpi-705e-digital-pressure-gauge-connector.jpg
  • pics/ge/druck-dpi-705e-digital-pressure-gauge-battery.jpg
  • pics/ge/druck-dpi-705e-digital-pressure-gauge-ext.jpg
  • pics/ge/druck-dpi-705e-is-digital-pressure-gauge-explosive-area-use.jpg
  • pics/ge/druck-dpi-705e-digital-pressure-gauge-availability.jpg
  • y:kNnd1DxYO-M

891.31 891.31 incl. VAT (749.00 excl. VAT), per piece *

Availability: shipping in 4-6 weeks

Packaging unit: 1 piece

Version (view data sheet)

Manufacturer: GE Druck

Country of origin: GB/0006

Customs tariff number: 90262020

Weight per piece: 600 g

Please give the recipient email address, as well as your name and email address.

Recipient
Sender

The fields marked with (×) are required.
Security (ANTI-SPAM)
( Examples: two + three = 5, three - five = -2 )
The product description does not help you?
No problem. Simply fill out the form and we will answer you as soon as possible.

Questions about the product

The fields marked with (×) are required.
Security (ANTI-SPAM)
( Examples: two + three = 5, three - five = -2 )

The Druck DPI 705E Series of handheld pressure and optional temperature indicators combine tough and rugged design with accurate and reliable measurements.

Compact and robust, the DPI 705E Series is designed for single handed operation and provides many essential features required for routine maintenance and system troubleshooting.
Pressure range 0 - 20 bar

Highlights

  • On request available with 48 pressure ranges from ±25 mbar to 1,400 bar (±1.69 psi to 20,000 psi / 2.5 KPa to 140 MPa) 
  • Total 1 year uncertainty down to 0.05% full scale (FS) over temperature range of -10°C to +50°C
  • Integral calibration record with calibration due count-down display
  • Rugged, handheld design with backlit high-contrast display
  • Leak test, tare, maximum/minimum and filter
  • Hazardous Area (Intrinsically safe) version available (DPI 705E-IS)
  • Optional remote plug and play pressure and Resistance Temperature Detector (RTD) sensors
  • Optional pneumatic and hydraulic hand pumps
  • Power on and use. No warm up time required.
  • 19 pressure measurement units (See below)
  • 1, 3 or 5 minute leak test
  • Impact resistant, sealed to IP54
  • Large digit high-contrast LCD with backlight
  • Optional carrying case with belt loop
  • Optional magnetic/loop hanging strap
  • Long battery life
  • Integral desk stand and hanger

Technical specifications

Available versions
(information data sheet
  • a = absolute
  • g = gauge Do not apply pressure greater than 1 bar (16 psi) absolute to the negative port of differential pressure indicators
Pressure ranges
  • 20bar (300psia)
  • (Ranges 25 mbar through to 1400 bar on request)
Accuracy0.1% FS accuracy
Pressure Unitsmbar, bar, Pa, hPa, Pa, MPa, psi , lb/ft2, kgf/cm2, kgf/m2, mmHg(0°C), mHg(0°C), inHg 0, mmH2O, cmH2O, mH2O, inH
2O (4°C, 20°C), ftH2O (4°C, 20°C)
Calibration Unitsmbar, bar, psi, kPa, mPa, hPa, Kgh/cm2
Leak testUser defined 1, 3 or 5 minute leak test
ZeroZero pressure correction (gauge/differential sensors)
Tare0 to 100% FS zero offset capability
Filter10 reading rolling average for unstable pressures
AlarmUser adjustable
Media compatibilityInternal sensor: stainless steel, except positive differential non-corrosive fluid and negative differential dry gas
Ambient Temperature°C and °F reading of local condition ±1.5°C (±3°F)
Display16mm LCD with ±99999 readout
Power ManagementLow battery indicator and selectable ‘auto off’
Battery4 x AA Alkaline/NiCd/NiMH cells
Power efficient design, can be used for 8 Hours per day, 6 days per week for 1 Year using a single set of batteries
Storage temperature-10°C to 50°C (15°F to 120°F)
Safety ConformanceCE marked, RCM
EnvironmentalIP54 (NEMA 12)
Dimensions200 x 95 x 43 mm
Weight563 g

 


a (absolute pressure), g (Gauge)
Property GTIN/EAN MPN (Manufacturer Part Number)
Abs (absolute pressure) - DPI 705E-1-13A-P1-H0
Gauge - DPI 705E-1-13G-P1-H0

 

Related products

* Price in Euro including VAT, plus forwarding charges.
In parentheses: price in Euro excluding VAT, plus forwarding charges.
Clients outside the EU as well as companies outside of Germany don't pay any VAT (excepting for shipping in Germany)!

 

 Shopping Cart    
Your shopping cart is empty
 Log in    

Password forgotten

Register

Distributor Login

Password forgotten

Register

 Transport    
forwarders
With package tracking
Shipping in 163 countries!
 Payment    
     
Prepayment using bank transfer => discount on all items of 2% Payment on invoice using bank transfer
 Follow us