Loctite EA M-21HP MED Two Part Medical Device Epoxy Adhesive 50ml

Loctite EA M-21HP MED Two Part Medical Device Epoxy Adhesive 50ml

pics/Loctite/EA M-21HP/loctite-ea-m-21hp-2-part-epoxy-adhesive-beige-50ml-cartridge.jpg
  • pics/Loctite/EA M-21HP/loctite-ea-m-21hp-2-part-epoxy-adhesive-beige-50ml-cartridge.jpg
  • pics/Loctite/Banners/Structural adhesives/EA M-21HP/main-banner-structural-adhesive-ea-m-21hp-01.jpg
  • pics/Loctite/logo_loctite.jpg

57.72 57.72 incl. VAT (48.50 excl. VAT), per piece *

Availability: Available

Packaging unit: 1 piece

Manufacturer: Henkel

Country of origin: US/0400

Customs tariff number: 35061000

Weight per piece: 119 g

Please give the recipient email address, as well as your name and email address.

Recipient
Sender

The fields marked with (×) are required.
Security (ANTI-SPAM)
( Examples: two + three = 5, three - five = -2 )
The product description does not help you?
No problem. Simply fill out the form and we will answer you as soon as possible.

Questions about the product

The fields marked with (×) are required.
Security (ANTI-SPAM)
( Examples: two + three = 5, three - five = -2 )

LOCTITE® EA M-21HP (known as LOCTITE® M-21HP) is an off-white, 2-part, epoxy adhesive which cures at room temperature once mixed, to form a tough bondline which provides high peel resistance and high shear strength. 

  • Pack size: 50ml double cartridge (Loctite no. 235017)
Application
  • Provides excellent bond strength to a wide variety of substrates including glass, plastics and metals.
  • The fully cured epoxy is resistant to a wide range of chemicals and solvents, and acts as an excellent electrical insulator.
  • ISO 10993 compliant for use in the assembly of disposable medical devices
Characteristics
  • Excellent peel resistance 
  • High shear strengths
  • Cures at room temperature
  • Works on a wide variety of substrates
Technical Information
 Chemical Type  Epoxy
 Appearance (Resin) Off-white to beige liquid
 Appearance (Hardener) Light straw colored liquid 
 Appearance (Mixture)  Off-white
 Components  Two part - Resin & Hardener
 Viscosity Medium
 Mix Ratio, by weight - Resin : Hardener 100:55
 Mix Ratio, by volume - Resin : Hardener 2 : 1
 Cure Room temperature cure after mixing

Loctite EA M21HP MED, Loctite EAM-21HP
Hazard Information (CLP)

  

 

Contents:

  • Part A: 4,4'-Methylen diphenyldiglycidylether, Bis(4,4'-glycidyloxyphenyl)-propan, 2-Propenoic acid, 2-methyl-, methyl ester, polymer with 1,3-butadiene, butyl-2-propenoate, and styrene, dodecan-1-thiol.
  • Part B: Phenol, 4,4′-(1-Methylethyliden)bis-, polymer with 2-(Chloromethyl)oxirane, reaction products with 3,3′-[Oxybis(2,1-ethandiyloxy)]bis[1-3,3'-Oxybis(ethylenoxy)bis(propylamine)], benzyl alcohol.

Pictograms:

  • Part A: No information on pictograms.
  • Part B: Hazard (as per the hazard signal word “Danger”).

Signal word:

  • Part A: Warning
  • Part B: Danger

Hazard statements:

  • Part A:
    • H315 Causes skin irritation.
    • H317 May cause allergic skin reactions.
    • H319 Causes serious eye irritation.
    • H411 Toxic to aquatic life with long-lasting effects.
  • Part B:
    • H302 Harmful if swallowed.
    • H314 Causes severe skin burns and eye damage.
    • H317 May cause allergic skin reactions.

Precautionary statements:

  • Prevention:
    • Part A: P273 Avoid release to the environment.
    • Part A: P280 Wear protective gloves.
    • Part B: P280 Wear protective gloves/protective clothing/eye protection/face protection.
  • Response:
    • Part A: P333+P313 If skin irritation or rash occurs: Get medical advice/attention.
    • Part A: P302+P352 IF ON SKIN: Wash with plenty of water and soap.
    • Part A: P337+P313 If eye irritation persists: Get medical advice/attention.
    • Part B: P303+P361+P353 IF ON SKIN (or hair): Remove all contaminated clothing immediately. Rinse skin with water [or shower].
    • Part B: P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
    • Part B: P310 Immediately call a POISON CENTER/doctor.
    • Part B: P333+P313 If skin irritation or rash occurs: Get medical advice/attention.

 

Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,

 

Information on product safety (Manufacturer, Contact)

Henkel AG & Co. KGaA, Henkelstr. 67, 40589 Düsseldorf, GERMANY, +49 211 7970, [email protected], www.henkel.com

Property GTIN/EAN MPN (Manufacturer Part Number)
- 79340306714 921200769

 

Related products

* Price in Euro including VAT, plus forwarding charges.
In parentheses: price in Euro excluding VAT, plus forwarding charges.
Clients outside the EU as well as companies outside of Germany don't pay any VAT (excepting for shipping in Germany)!

 

 Shopping Cart    
Your shopping cart is empty
 Log in    

Password forgotten

Register

Distributor Login

Password forgotten

Register

 Transport    
forwarders
With package tracking
Shipping in 165 countries!
 Payment    
     
Prepayment using bank transfer => discount on all items of 2% Payment on invoice using bank transfer
 Follow us