Klübersynth UH1 14-31 Lubricating grease for food industry 370g

Klübersynth UH1 14-31 Lubricating grease for food industry 370g

pics/Kluber/Copyright EIS/cartridge/kluebersynth-uh1-14-31-klueber-schmierfett-fuer-die-lebensmittelindustrie-kartusche-370g-ol.jpg
  • pics/Kluber/Copyright EIS/cartridge/kluebersynth-uh1-14-31-klueber-schmierfett-fuer-die-lebensmittelindustrie-kartusche-370g-ol.jpg
  • pics/Kluber/Copyright EIS/cartridge/kluebersynth-uh1-14-31-klueber-schmierfett-fuer-die-lebensmittelindustrie-kartusche-370g-l.jpg
  • pics/Kluber/Copyright EIS/kluebersynth-uh1-14-31-lubricating-grease-for-the-food-processing-industry-370g-cartridge-back.jpg
  • pics/Kluber/klueber_logo.jpg

71.34 71.34 incl. VAT (59.95 excl. VAT), per piece *

Availability: In Stock - shipping immediately

Packaging unit: 1 piece

Manufacturer: KLUBER

Country of origin: ES/0011

Customs tariff number: 34031980

Weight per piece: 420 g

Please give the recipient email address, as well as your name and email address.

Recipient
Sender

The fields marked with (×) are required.
Security (ANTI-SPAM)
( Examples: two + three = 5, three - five = -2 )
The product description does not help you?
No problem. Simply fill out the form and we will answer you as soon as possible.

Questions about the product

The fields marked with (×) are required.
Security (ANTI-SPAM)
( Examples: two + three = 5, three - five = -2 )
Synthetic smooth-running grease for the food-processing and pharmaceutical industries.

Klübersynth UH1 14-31 was especially developed for the foodprocessing and pharmaceutical industries. This lubricant is NSF H1-registered and therefore  complies with FDA 21 CFR § 178.3570.
The use of Klübersynth UH1 14-31, an NSF H1-registered lubricant, is a contributor towards the supporting of food safety. This needs to be considered not in isolation but in line with other appropriate actions which have by law to be fulfilled by a food manufacturing plant to allow for food to be manufactured safely.
Klübersynth UH1 14-31 excels by its low-temperature and antiwear properties as well as good water resistance and effective wear- and corrosion protection.

Benefits for your application:
  • Reliable operation also at low temperatures due to soft consistency and low base oil viscosity
  • Reduced risk of premature component failure due to good adhesion and anticorrosive behaviour
  • Lubricant starvation prevented by very good pumpability in centralised lubricating systems
  • NSF-H1 registration for higher process reliability

Application:
Klübersynth UH1 14-31 is used on machines and equipment in the food-processing and pharmaceutical industries, preferably at lubrication points where  technically unavoidable contact with the food product cannot be excluded. However, we recommend supplying all lubrication points in the area with Klübersynth UH1 14-31 so as to avoid problems of lubricant contamination.
Klübersynth UH1 14-31 should preferably be used when extremely smooth running and a wide speed range are required.
It is intended for plain- and rolling bearings, lifting cylinders, joints, seals, etc. as well as for the lubrication of friction points in freeze and deep-freeze tunnels or for chains which run more smoothly when lubricated with a soft grease.

Application notes:
Klübersynth UH1 14-31 can be applied by brush, spatula, grease gun or automatic lubricating systems.
Service temperatures of Klübersynth UH1 14-31 range from -45 °C to 120 °C. For certain applications, lower temperatures are also possible. The lubricating film retains its functionality down to approx. -70 °C.

Product data:
 NLGI grade, DIN 51818 1
 NSF-H1 registration 056356
 Lower service temperature -45 °C / -49 °F
 Upper service temperature 120 °C / 248 °F
 Texture short-fibred
 Color space white
 Texture homogeneous
 Density at 20 °C approx. 0.90 g/cm³
 Worked penetration, DIN ISO 2137, 25 °C, lower limit value 310 x 0.1 mm
 Worked penetration, DIN ISO 2137, 25 °C, upper limit value 340 x 0.1 mm
 Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 30 mm²/s
 Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C approx. 6 mm²/s
 Speed factor (n x dm) approx. 700 000 mm/min
 Drop point, DIN ISO 2176, IP 396 >= 220 °C
 Functional lubricant film >= -70°C °C
 Flow pressure of lubricating greases, DIN 51805, test temperature:-45 °C <= 1 400 mbar
 Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened
 original container, approx.
 24 months

No files available for download

Property GTIN/EAN MPN (Manufacturer Part Number)
- 0725175312146 943150158

 

Related products

* Price in Euro including VAT, plus forwarding charges.
In parentheses: price in Euro excluding VAT, plus forwarding charges.
Clients outside the EU as well as companies outside of Germany don't pay any VAT (excepting for shipping in Germany)!

 

 Shopping Cart    
Your shopping cart is empty
 Log in    

Password forgotten

Register

Distributor Login

Password forgotten

Register

 Transport    
forwarders
With package tracking
Shipping in 163 countries!
 Payment    
     
Prepayment using bank transfer => discount on all items of 2% Payment on invoice using bank transfer
 Follow us