Klübersynth VR 69-252 N Lubrication valve grease 1kg can

Klübersynth VR 69-252 N  Special lubricating grease for drinking water taps

• Klübersynth VR 69-252 N is a tailor-made, highly adhesive, light-colored lubricating grease based on fatty oil, calcium soap and PTFE.
• With a carefully selected combination of active substances, this lubricant offers very good performance and high functionality combined with a long service life.
• Klübersynth VR 69-252 N clearly surpasses the load alternation requirement of 200,000 cycles at a closing force of 2.5 Nm and is therefore in full compliance with the European standard DIN EN 200. 
• Temperature range: -20°C to +100°C 
• Volume: Can 1 kg
• Also available in: Bucket 5 kg

Benefits for your application

• Longer component life due to less friction and wear, especially in brass spindle valves.
• Prevention of stick-slip at high tightening torques and 500,000 load cycles.
• A lubricant for all components meeting all technical, design and chemical requirements, e.g. the BWGL-KTW (UBA- guideline) and the French ACS Guidelines.
• Cost-saving as lubricant can be applied by brush or using fully automatic mass application techniques.

Applications

• Klübersynth VR 69-252 N is used for the lubrication of all friction points in valves subject to mechanical loads and in some cases also for ceramic valves containing EPDM or NBR elastomers.
• Further applications are in locking and control valves such as plug or ball valves, flaps, slides or other valves,
  and in shower and heating valves and fittings. 

Application notes

• Klübersynth VR 69-252 N can be easily applied by means of brush, sponge, spatula, grease gun or other usual metering equipment.

Technical specifications