Martor 595.00 KANTEX Debburing tool 1.00 mm

If you approach MARTOR with special wishes, you can expect special solutions. The TRIMMEX KANTEX is that type of special case. You can use it idealy to cut glued edges. Depending on the use, you can turn the blade through 90 degrees - and work, now with a pushing, now with a pulling movement in this way.

Details:

Robust Design

No matter how much you turn and turn around the TRIMMEX - nothing wobbles here. The massive handle ends in the metal blade carrier with edges.

Ergonomic handle

The TRIMMEX KANTEX has a rounded off handle suited to your hands. The guide through the blade carrier and open visibility of the cutting point also assist you in precise cutting.

Double cutting edge blade

Before you have to change the quality blade, you can turn it over once. This will double the usage time of the blade - and reduce the energy you spend. Because your product will cut like new again.

Product information:

- Measurements (L x W x H): 130 x 22 x 34 mm
- Weight product: 54.5 g
- Basic material: Plastic

Installed blade:

    KANTEX No. 95
 
    Blade single bevel edge-ground
    Length: 23.00 mm
    Width: 25.00 mm
    Material thickness: 1.00 mm