Bostik 2402 Neoprene glue + hardener 1 Liter

Neoprene glue + hardener 2402 BOSTIK special rubber on metal 1L. The High Performance Separating Hardener contact adhesive is applied with a brush on natural rubber, neoprene, nitrile, hypalon and laminate. It is used after printing metals with primary.

Characteristics :
 

• Neoprene glue + hardener 2402
• Color: cream
• Packaging: glue 1L + hardener 40ml
• Minimum operating temperature: + 15 ° C
• Drying time: about 10 minutes
• Maximum open time: 45 minutes depending on media porosity, temperature and relative humidity (70% RH max)
• Pot life of the mixture: about 2 hours
• Proportion of the mixture: used after mixing with 4.5% by weight of hardener

Advantages :
 

• Outstanding adhesion to metals
• High resistance to tearing and temperature
• Without tolene

Tips:

• Substrates must be sound, dry, clean, dust-free, degreased and non-friable.

USING ADVICE

Application using a brush or a fine notched spatula. Apply a regular layer of glue on each face to be assembled. Allow the solvents to dry for 10 to 15 minutes. Brush the bonded surfaces with strong pressure for a few seconds (15 to 20 seconds). The catch is immediate and does not allow readjustment. On porous materials, it is advisable to apply a first coat of glue and let it dry for at least an hour. The optimal resistance is obtained after about 24 hours.
 
Use Bostik products with care. Before use, read the label and product information.