HyloBond M5101 Two component acrylic structural adhesive 400ml

HyloBond M5101 Two component acrylic structural adhesive 400ml

pics/Hylomar/EIS copyright/HyloBond M5101/hylobond-m5101-two-component-acrylic-structural-adhesive-400ml-005.jpg
  • pics/Hylomar/EIS copyright/HyloBond M5101/hylobond-m5101-two-component-acrylic-structural-adhesive-400ml-005.jpg
  • pics/Hylomar/EIS copyright/HyloBond M5101/hylobond-m5101-two-component-acrylic-structural-adhesive-400ml-004.jpg
  • pics/Hylomar/EIS copyright/HyloBond M5101/hylobond-m5101-two-component-acrylic-structural-adhesive-400ml-002.jpg
  • pics/Hylomar/hylomar-logo.jpg

66.58 66.58 incl. VAT (55.95 excl. VAT), per piece *

Availability: Available

Packaging unit: 1 piece

Manufacturer: Hylomar

Country of origin: GB/0006

Customs tariff number: 32141010

Weight per piece: 500 g

Please give the recipient email address, as well as your name and email address.

Recipient
Sender

The fields marked with (×) are required.
Security (ANTI-SPAM)
( Examples: two + three = 5, three - five = -2 )
The product description does not help you?
No problem. Simply fill out the form and we will answer you as soon as possible.

Questions about the product

The fields marked with (×) are required.
Security (ANTI-SPAM)
( Examples: two + three = 5, three - five = -2 )

HYLO®BOND M5101 is a toughened, two component acrylic adhesive designed for bonding a wide range of substrates.

This structural methacrylate adhesive has superior peel, shear and compressive properties. HYLO®BOND 5101 displays high toughness and can be used on gaps up to 15mm. it has a gel time of approximately 5 minutes. The adhesive has excellent fatigue and weathering resistance.

Mix ratio 10:1, cured tensile strength 16 N/mm², Volume: 400 ml

Recommended substrates
  • Metals - aluminum, stainless steel, carbon steel, powder coated metals
  • Plastics - acrylic, ABS, PVC
  • COMPOSITES Urethane, vinyl ester, polyester, carbon fiber, FRP / GRP

Not suitable for : polyethylene, PTFE, nylon, galvanized metals, polypropylene.

INSTRUCTIONS FOR USE

The surface to be bonded can have a great impact on the cured properties of Hylobond. Care must be taken to ensure that all traces of oil, grease and dirt are removed from the substrate. This can be done with a degreasing agent or solvent such as acetone. Abrading or etching the surface can greatly improve the properties of the bonded joint, if this is done a second degreasing process is highly recommended.

Prior to dispensing it is important to extrude the product onto a non-bonding surface to ensure that bead coming out of the nozzle is a uniform grey colour. As soon as the bead is the correct colour the product should be used immediately to prevent curing in the nozzle. Enough adhesive should be used to fill the bond gap before the parts are joined. Once the substrates are joined sufficient pressure should be applied (e.g. by clamping) to avoid dry bonding and prevent movement in the joint. These processes must be completed before the geltime expires.

The optimal application temperature is about 20°C, the geltime and cure time will be affected at temperatures much higher or lower than this. The viscosity is also affected by temperature so to ensure a consistent extrusion rate and geltime the temperature should be kept constant.

Technical specifications
UNCURED MATERIALS
 AdhesiveActivator
Mixing Ratio (By Weight)91
Mixing Ratio (By Volume)101
Specific Gravity (gml-1)0.97 – 1.011.04 – 1.14
Viscosity (@22°C, cPs)90,000 – 130,00075,000 – 110,000
ColourCreamBlack
 
MIXED MATERIAL
 Geltime (@22°C)≈5min
Cure Time (@22°C)14 – 18min
Gap Filling≤15mm
ColourGrey
 
CURED MATERIAL
Tensile Strength16 Nmm­-²
Elongation75%
Shear Strength PVC/ABS15 Nmm-²
Shear Strength (Aluminium)23 Nmm-²
Shear Strength (Aluminium)18 Nmm-²
Shear Strength (Stainless Steel/Acrylic)22 Nmm-²


Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR,
Property GTIN/EAN MPN (Manufacturer Part Number)
- 0503662616003 F/HYB5101/400M

 

Related products

* Price in Euro including VAT, plus forwarding charges.
In parentheses: price in Euro excluding VAT, plus forwarding charges.
Clients outside the EU as well as companies outside of Germany don't pay any VAT (excepting for shipping in Germany)!

 

 Shopping Cart    
Your shopping cart is empty
 Log in    

Password forgotten

Register

Distributor Login

Password forgotten

Register

 Transport    
forwarders
With package tracking
Shipping in 163 countries!
 Payment    
     
Prepayment using bank transfer => discount on all items of 2% Payment on invoice using bank transfer
 Follow us