Klüberplex AG 11-462 Operating and priming lubricant 400ml spray can

Klüberplex AG 11-462 Operating and priming lubricant 400ml spray can

pics/Kluber/Copyright EIS/spray/kluberplex-ag-11-462-operating-and-priming-lubricant-400ml-spray-can.jpg
  • pics/Kluber/Copyright EIS/spray/kluberplex-ag-11-462-operating-and-priming-lubricant-400ml-spray-can.jpg
  • pics/Kluber/klueber_logo.jpg

55.19 55.19 incl. VAT (46.38 excl. VAT), per piece *

Availability: In Stock - shipping immediately

Packaging unit: 1 piece

Manufacturer: KLUBER

Country of origin: DE/0004

Customs tariff number: 34031980

Weight per piece: 400 g

Please give the recipient email address, as well as your name and email address.

Recipient
Sender

The fields marked with (×) are required.
Security (ANTI-SPAM)
( Examples: two + three = 5, three - five = -2 )
The product description does not help you?
No problem. Simply fill out the form and we will answer you as soon as possible.

Questions about the product

The fields marked with (×) are required.
Security (ANTI-SPAM)
( Examples: two + three = 5, three - five = -2 )
Klüberplex AG 11-462 White operating and priming lubricants | N° 081302
  • Klüberplex AG 11-461 and 462 offer very good wear and corrosion protective properties contributing to an efficient operation of your highly loaded installations and components.
  • These adhesive greases have proven effective for many years, providing reliable protection of components also when exposed to salt water or during extended periods of standstill.
  • Temperature range: -10°C to +150°C 
  • Volume: 400 ml spray can
  • Available in 450 g cartridge, 1kg can, 25kg bucket
Your benefits at a glance
  • Reduced maintenance needs
    • low contamination of machine environment due to use of white solid lubricants and low lubricant consumption
    • very good adhesion even at low temperatures
    • product streamlining possible as the product is suitable for gear rim / pinion drives and bearings
  • Improved component performance
    • less wear due to selected solid lubricants and additives
    • very good corrosion protection also when exposed to salt water
Application
  • Klüberplex AG 11-461 and 462 have been designed as priming lubricants for gear rim and pinion drives and can also be used as contrast lubricant for checking the drive's load pattern.
  • In the offshore sector, marine applications and wind power stations subject to salt water, open gears, low-speed rolling bearings, sliding and guide rails, steel cables of winches or cranes and similar components can be effectively lubricated and protected using Klüberplex AG 11-461 and 462.
Application notes
  • Priming lubrication
    • Klüberplex AG 11-461 and 462 are applied by brush or spatula.
    • For optimum results, we recommend cleaning the surfaces to be lubricated prior to lubrication.
    • To determine the right quantity for your application, the diagram overleaf provides guide values.
  • Operational lubrication
    • Klüberplex AG 11-461 and 462 can be applied by manually operated grease guns or through appropriate central lubricating systems and are sprayable at temperatures down to 0 °C.
    • When applied by spray, an exhaustion device is necessary in order to avoid inhalation of spray mist (see SDS point 2).
    • Provided sufficient relubrication is ensured, short-term thermal loads of up to 200°C are permissible.The lubricant quantities to be used depend on the operating conditions and must be determined for each application individually. Extended exposure to intense sunlight may slightly change the lubricant's surface color without affecting its performance.
Technical specifications
 Article number 081302
 Solid lubricants, percentage approx. 20 % by weight
 Lower service temperature -10 °C / 14 °F
 Upper service temperature 150 °C / 302 °F
 Color space white
 Texture homogeneous
 Density at 20 °C approx. 1.05 g/cm³
 NLGI grade, DIN 51818 2
 Worked penetration, DIN ISO 2137, 25 °C, lower limit value 265 x 0.1 mm
 Worked penetration, DIN ISO 2137, 25 °C, upper limit value 295 x 0.1 mm
 ISO viscosity grade of the base oil, DIN ISO 3448 460
 Drop point, DIN ISO 2176, IP 396 >= 180 °C
 FZG scuffing test, based on DIN ISO 14635, A/2,76/room temperature, scuffing load stage >= 12
 Functional lubricant film approx. -40 °C
 Water resistance, DIN 51807 pt. 01, 3 h/90 °C, rating 0 - 90
 Minimum shelf life from the date of manufacture - in a dry, frostfree place and in the unopened
 original container, approx.
 24 months


Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR,
Property GTIN/EAN MPN (Manufacturer Part Number)
- - 943150113

 

Related products

* Price in Euro including VAT, plus forwarding charges.
In parentheses: price in Euro excluding VAT, plus forwarding charges.
Clients outside the EU as well as companies outside of Germany don't pay any VAT (excepting for shipping in Germany)!

 

 Shopping Cart    
Your shopping cart is empty
 Log in    

Password forgotten

Register

Distributor Login

Password forgotten

Register

 Transport    
forwarders
With package tracking
Shipping in 163 countries!
 Payment    
     
Prepayment using bank transfer => discount on all items of 2% Payment on invoice using bank transfer
 Follow us