Klüber POLYLUB GLY 801 Special synthetic lubricating grease 25kg

Klüber POLYLUB GLY 801 Special synthetic lubricating grease 25kg

pics/Kluber/Copyright EIS/bucket/klueber-polylub-gly-801-special-synthetic-lubricating-grease-25kg.jpg
  • pics/Kluber/Copyright EIS/bucket/klueber-polylub-gly-801-special-synthetic-lubricating-grease-25kg.jpg
  • pics/Kluber/klueber_logo.jpg

4046.23 4,046.23 incl. VAT (3,400.19 excl. VAT), per piece *

Availability: shipping in 2-3 weeks

Packaging unit: 1 piece

Manufacturer: KLUBER

Country of origin: BE/0017

Customs tariff number: 34031980

Weight per piece: 25.0 kg

Please give the recipient email address, as well as your name and email address.

Recipient
Sender

The fields marked with (×) are required.
Security (ANTI-SPAM)
( Examples: two + three = 5, three - five = -2 )
The product description does not help you?
No problem. Simply fill out the form and we will answer you as soon as possible.

Questions about the product

The fields marked with (×) are required.
Security (ANTI-SPAM)
( Examples: two + three = 5, three - five = -2 )

Special synthetic lubricating greases for a wide application range

  • The product series POLYLUB GLY 801 is based on a synthetic hydrocarbon oil, mineral oil and special lithium soap. It comprises three lubricating greases reducing friction and wear in plain bearings, slideways and small gears made of plastic.
  • The lubrication of plastics is special in a number of ways. As the behaviour of metals and plastics differs in many aspects, the lubricants' properties have to be adjusted to the plastic. Compared to many metals, plastics are relatively soft. Solid lubricants, which may achieve a positive effect on many metal friction points, can have a negative or no effect at all on plastic lube points. With the formulation of POLYLUB GLY 801, Klüber Lubrication offers products which are free of solid lubricants, and offer good adhesion.
  • Content: 25kg bucket
  • Available in 400g cartridget, 1kg can, 25kg bucket

Benefits for your application

  • For many applications in connection with various plastics and elastomers
  • Approved by many renowned manufacturers and suppliers in the automotive industry, e.g. DBL 6827.60, VW TL 52147, Ford WSD-M1 C244-A, Brose Fettgruppe 11 and many more
  • The integrated UV indicator allows a reliable lubricant detection (wave length 366 nm) even with minimum quantity lubrication
  • Contributes to mechanical damping and noise reduction of switches and contacts.

Application

  • Vehicles: Gearshift linkages, moving parts of the heating and ventilation system, shock absorber seals, tie rod elements, seat mechanisms, sun roof guides, pedals.
  • Plain bearings: Many types of plain bearing designs. POLYLUB GLY 801 prevent stick-slip to a large extent, particularly in applications where normally a hydrodynamic lubricating film cannot form.
  • Gears: Small electric gears with plastic-metal friction components, manual gears operating at very low sliding speeds.
  • Pneumatic installations: Pneumatic valves and cylinders with and without piston rod (for these applications, the upper service temperature should not exceed 130 °C).
  • Seals: Lubricating and sealing grease for various types of seals. The POLYLUB GLY and 801 lubricants are also suitable for many other plastic components subject to wear caused by relative movement against metal or plastic surfaces. Owing to good damping properties, especially of POLYLUB GLY 801 and 501, noise is considerably reduced.

Application notes

  • POLYLUB GLY 801 are applied by brush, spatula or automatic metering systems.

Product data

 NLGI grade, DIN 51818 1
 Chemical composition, type of oil mineral oil
 Chemical composition, type of oil synthetic hydrocarbon oil
 Chemical composition, thickener special lithium soap
 Chemical composition UV additive
 Lower service temperature -40 °C / -40 °F
 Upper service temperature 130 °C / 266 °F
 Color space beige
 Density at 20 °C approx. 0.88 g/cm³
 Worked penetration, DIN ISO 2137, 25 °C, lower limit value 310 x 0.1 mm
 Worked penetration, DIN ISO 2137, 25 °C, upper limit value 340 x 0.1 mm
 Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 730 mm²/s
 Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C approx. 60 mm²/s
 Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value 4 000 mPas
 Shear viscosity at 25°C, shear rate 300 s-1, equipment: rotational viscometer, upper limit value 8 000 mPas
 Corrosion inhibiting properties of lubricating greases, DIN51802, (SKF-EMCOR), test duration:
 1 week, distilled water
 <= 1 corrosion degree
 Oil separation, ASTM D 6184 [FTMS 791 C 321], after 30h/100 °C <= 4 % by weight
 Drop point, DIN ISO 2176 >= 250 °C
 Oxidation stability of lubricating greases, ASTM D942, 100 h/99 °C, pressure drop <= 0.3 bar
 Water resistance, DIN 51807 pt. 01, 3 h/90 °C, rating <= 1 - 90
 Minimum shelf life from the date of manufacture - in a dry, frostfree place and in the unopened
 original container, approx.
 36 months
 

Property GTIN/EAN MPN (Manufacturer Part Number)
- - 943150934

 

Related products

* Price in Euro including VAT, plus forwarding charges.
In parentheses: price in Euro excluding VAT, plus forwarding charges.
Clients outside the EU as well as companies outside of Germany don't pay any VAT (excepting for shipping in Germany)!

 

 Shopping Cart    
Your shopping cart is empty
 Log in    

Password forgotten

Register

Distributor Login

Password forgotten

Register

 Transport    
forwarders
With package tracking
Shipping in 163 countries!
 Payment    
     
Prepayment using bank transfer => discount on all items of 2% Payment on invoice using bank transfer
 Follow us