Klüber CENTOPLEX 2 Multi-purpose grease for bearings 1kg can

CENTOPLEX 2 Multi-purpose greases for rolling and plain bearings | N° 020062

• CENTOPLEX 2 and 3 are multi-purpose greases based on oxidation-resistant mineral oils and lithium soap.
• They meet the rolling bearing grease requirements according to DIN 51825 K.
• Due to the good resistance to working under normal temperatures and loads these greases can be used for long-term lubrication.
• The more viscous CENTOPLEX of NLGI grade 3 is to be used for bearings with inclined or vertical shafts or insufficiently sealed bearings.
• Temperature range: -30°C to +130°C 
• Volume: 1 kg can 
• Also available in: 25kg bucket, 180kg drum

Benefits for your application

• Long-term lubrication of simple applications
• Multi-purpose greases

Application

• CENTOPLEX 2 and CENTOPLEX 3 are used for rolling and plain bearings. When used for long-term lubrication, temperatures at the friction point should be < 70 °C.
• The greases can be used up to their maximum service temperature of 130 °C provided fresh grease is constantly fed to the friction point. We would be pleased to provide more detailed information on relubrication intervals and quantities.
• CENTOPLEX 2 and 3 are also suitable for the lubrication of toothed and worm gears, guides and threaded spindles.

Application notes

• CENTOPLEX 2 and 3 can be applied by grease gun, brush or spatula. If a fully-automatic lubrication system is available for relubrication, CENTOPLEX 2 should be used.
• For initial lubrication CENTOPLEX 2 or CENTOPLEX 3 can be used depending on the bearing seal.

Technical specifications