Klüber STABURAGS NBU 4 Lubricating grease 1kg tin

Klüber STABURAGS NBU 4 Lubricating grease 1kg tin

€ 156.09 156.09 incl. VAT (131.17 excl. VAT), per piece *

Availability: In Stock - shipping immediately

Packaging unit: 1 piece

Manufacturer: KLUBER

Country of origin: AT/0038

Customs tariff number: 34031980

Weight per piece: 1.1 kg

The product description does not help you?
No problem. Simply fill out the form and we will answer you as soon as possible.

Klüber STABURAGS NBU 4 Lubricating grease with excellent wear resistance | n° 017050

STABURAGS NBU 4, 12 are lubricating greases based on mineral oil and barium complex soap. These products are resistant to very high specific surface pressure, thus ensuring good wear protection. In addition, they are resistant to corrosion, water and many diluted alkaline and acid solutions
Content: 1kg can
Available in 400g cartridge, 1kg can, 25kg bucket

Benefits for your application:

Application:

STABURAGS NBU 4 has been used successfully on highspeed rolling bearings exposed to humidity or ambient media. It is suitable for rolls, spindles, cam rollers, tensioning rollers andv motors.
STABURAGS NBU 12 is efficient on medium-speed rolling bearings subject to humidity or ambient media.
It is used on water pumps, wheel bearings and motors; and in the textile industry, on all wet processing equipment such as washing, mercerising and dyeing machines.

Application notes:

Product data:

Article number	17050
Chemical composition, type of oil	mineral oil
Chemical composition, thickener	barium complex soap
Lower service temperature	-20 °C / -4 °F
Upper service temperature	90 °C / 194 °F
Service temperature, upper limiting value for continuous lubrication	130 °C
Colour space	beige
Density at 20 °C	approx. 0,96 g/cm³
Worked penetration, DIN ISO 2137, 25 °C, lower limit value	245 x 0,1 mm
Worked penetration, DIN ISO 2137, 25 °C, upper limit value	275 x 0,1 mm
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C	approx. 46 mm²/s
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C	approx. 7 mm²/s
Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value	6 000 mPas
Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value	10 000 mPas
Drop point, DIN ISO 2176, IP 396	>= 220 °C
Four-ball tester, welding load, DIN 51350 pt. 04	>= 3 000 N
Speed factor (n x dm)	500 000 mm/min
Water resistance, DIN 51807 pt. 01, 3 h/90 °C, rating	<= 1 - 90
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.	60 mois

STABURAGS NBU4