Klübersynth UH1 14-1600 Synthetic lubricating grease 25kg

Klübersynth UH1 14-1600 Synthetic lubricating grease 25kg

pics/Kluber/Copyright EIS/bucket/klubersynth-uh1-14-1600-synthetic-lubricating-grease-25kg.jpg
  • pics/Kluber/Copyright EIS/bucket/klubersynth-uh1-14-1600-synthetic-lubricating-grease-25kg.jpg
  • pics/Kluber/klueber_logo.jpg

2040.81 2,040.81 incl. VAT (1,714.97 excl. VAT), per piece *

Availability: shipping in 1-2 weeks

Packaging unit: 1 piece

Manufacturer: KLUBER

Country of origin: DE/0004

Customs tariff number: 34031980

Weight per piece: 26.8 kg

Please give the recipient email address, as well as your name and email address.

Recipient
Sender

The fields marked with (×) are required.
Security (ANTI-SPAM)
( Examples: two + three = 5, three - five = -2 )
The product description does not help you?
No problem. Simply fill out the form and we will answer you as soon as possible.

Questions about the product

The fields marked with (×) are required.
Security (ANTI-SPAM)
( Examples: two + three = 5, three - five = -2 )

Synthetic grease for valves and fittings in the food-processing and pharmaceutical industries

  • Klübersynth UH1 14-1600 is a synthetic high-performance lubricating grease. It is registered as NSF H1 and complies with FDA 21 CFR Sec. 178.3570. Klübersynth UH1 14-1600, an NSF H1-registered lubricant, is a contributor towards the supporting of food safety. The use of this lubricant needs to be
    considered not in isolation but in line with other appropriate actions which have by law to be fulfilled by a food manufacturing plant to allow for food to be manufactured safely. Its soft consistency, good wear protection and scuffing load stage 11 in the FZG test ensure good lubricant distribution and reduced wear in the gear.
  • Content: 25kg


Benefits:

  • Improved pumpability due to its soft consistency
  • Component life enhanced resulting from a special thickener with good adhesion and good corrosion protection
  • ISO 21469 certified – supports the compliance with the hygienic requirements in your production. You will find further information about ISO Standard 21469 on our website www.klueber.com.


Application:

  • Klübersynth UH1 14-1600 has been especially designed for applications in machines and installations used in the food processing and pharmaceutical industries where contact with the food product is technically unavoidable. It is intended for use as a fluid gear grease for the immersion lubrication of toothed gears, worm gears and chains operating more smoothly with a softer grease.


Application notes:

  • Klübersynth UH1 14-1600 is applied by brush, spatula, grease gun or via central lubrication systems. Before substituting Klübersynth UH1 14-1600 for other greases, thoroughly clean all lubrication/friction points. If the greases are miscible, relubrication is sufficient. In gears, however, used grease should be removed as far as possible.
  • The product can normally be applied by means of centralised lubricating systems. Please note, however, that due to different system configurations and application conditions the pumpability of the product has to be confirmed with the system manufacturer for each individual application. We will be pleased to provide assistance in this matter.
  • A special feature of this product is the very fast increase of worked penetration. It quickly becomes very soft (approx. 6 months) thus falling beyond the indicated worked penetration range.
 

Product data:

Article number96038
NLGI grade, DIN 518180/00
NSF-H1 registration136 695
Chemical composition, type of oilsynthetic hydrocarbon oil
Chemical composition, thickeneraluminium complex soap
Lower service temperature-45 °C / -49 °F
Upper service temperature120 °C / 248 °F
Colour spaceyellow
Texturefibrous
Texturehomogeneous
Density at 20 °Capprox. 0,85 g/cm³
Worked penetration, DIN ISO 2137, 25 °C, lower limit value370 x 0,1 mm
Worked penetration, DIN ISO 2137, 25 °C, upper limit value430 x 0,1 mm
Drop point, DIN ISO 2176, IP 396>= 200 °C
FZG scuffing test, based on DIN ISO 14635, A/2,76/50, scuffing load stage11
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.12 months

No files available for download

Property GTIN/EAN MPN (Manufacturer Part Number)
- - 943150375

 

Related products

* Price in Euro including VAT, plus forwarding charges.
In parentheses: price in Euro excluding VAT, plus forwarding charges.
Clients outside the EU as well as companies outside of Germany don't pay any VAT (excepting for shipping in Germany)!

 

 Shopping Cart    
Your shopping cart is empty
 Log in    

Password forgotten

Register

Distributor Login

Password forgotten

Register

 Transport    
forwarders
With package tracking
Shipping in 163 countries!
 Payment    
     
Prepayment using bank transfer => discount on all items of 2% Payment on invoice using bank transfer
 Follow us