Klübersynth HBE 94-401 Synthetic heavy-duty long-term lubricant 400g

Klübersynth HBE 94-401 Synthetic heavy-duty long-term lubricant 400g

€ 46.79 46.79 incl. VAT (39.32 excl. VAT), per piece *

Availability: In Stock - shipping immediately

Packaging unit: 1 piece

Manufacturer: KLUBER

Country of origin: DE/0004

Customs tariff number: 34031980

Weight per piece: 400 g

The product description does not help you?
No problem. Simply fill out the form and we will answer you as soon as possible.

Synthetic heavy-duty grease for long-term lubrication

As a manufacturer or operator of modern installations operating at high temperature, you need to protect components subject to high loads and with a high percentage of sliding friction reliably against wear and corrosion, even when they are not relubricated continuously (e.g. sealed rolling bearings). With Klübersynth HBE 94-401 we offer you a lubricating grease
based on high-quality synthetic base oil and a special calcium complex soap thickener. This combination enables the formation of a lubricating film with high resistance to mechanical
loads providing excellent wear protection. Moreover, Klübersynth HBE 94-401 is resistant to water and has a good sealing effect due to the special thickener component used. Are
your components subject to strong oscillations? With its very good antiwear properties, Klübersynth HBE 94-401 meets this challenge too.
Content: 400g cartridge
Available in 400g cartridge, 1kg can, 25kg bucket

Benefits

Very good wear protection,
Excellent corrosion protection
Excellent water resistance
Reduced maintenance costs due to extended relubrication intervals or lifetime lubrication, even at elevated temperatures due to synthetic grease technology

Application

loaded rolling and plain bearings at high temperatures, e.g. in the steel industry.
This special lubricating grease meets the complex requirements of your for-life lubricated components, e.g. in
– support rollers in continuous casting installations
– conveyor roller bearings in continuous furnaces
– support roller bearings in pickling and tin plating
– plain bearings of forging presses
Due to its excellent wear resistance this lubricating grease can also be used for roller bearings in wood pellet presses.

Product data

Article number	4295
Chemical composition, type of oil	synthetic hydrocarbon oil
Chemical composition, thickener	calcium complex soap
Lower service temperature	-35 °C / -31 °F
Upper service temperature	160 °C / 320 °F
Colour space	brown
Texture	long-fibred
Texture	homogeneous
Density at 20 °C	approx. 0,93 g/cm³
Flow pressure of lubricating greases, DIN 51805-2, test temperature: -35 °C	<= 1 400 mbar
Worked penetration, DIN ISO 2137, 25 °C, lower limit value	290 x 0,1 mm
Worked penetration, DIN ISO 2137, 25 °C, upper limit value	320 x 0,1 mm
Speed factor (n x dm)	approx. 300 000 mm/min
Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value	4 000 mPas
Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value	8 000 mPas
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C	approx. 400 mm²/s
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C	approx. 40 mm²/s
Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water	<= 1 corrosion degree
Oil separation, DIN 51817 N, after 7 d/40 °C	<= 3 % by weight
Drop point, DIN ISO 2176, IP 396	>= 230 °C
Four-ball tester, welding load, DIN 51350 pt. 04	>= 2 800 N
Water resistance, DIN 51807 pt. 01, 3 h/90 °C, rating	0 - 90
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.	24 months