Klüber Presspate SEM 95/800 T Lubricant for cold forming 1kg can

PRESSPATE SEM 95/800 T High-performance lubricant for cold forming of sheets and tubes | N° 043050

• In your metal forming operations, the challenge is to find a reliable lubricant that protects tools against wear. Upon completion of the forming process, the lubricant should be easily removed.
• In this respect, PRESSPATE SEM 95/800 T and PRESSPATE TB can offer optimal support. Both products offer excellent lubrication performance especially when used for the cold forming of thick or thin metal sheets or tubes. This ensures easier process start-up even under difficult ambient conditions leading to a reduction of reject rates.
• Volume: 1 kg can 
• Also available in: 5kg bucket, 25kg bucket, 50kg bucket, 180kg drum

Benefits for your application

• Reduction of friction and wear, especially in deep-drawing and bending operations involving high degrees of deformation
• Improving process stability for a lower reject rate
• Increasing tool life; reduction of tooling costs and set-up times compared with conventional, fluid metal forming oils
• Workpieces can be cleaned using conventional cleaning agents and processes

Applications

• You may use PRESSPATE SEM 95/800 T and PRESSPATE TB for highly varied applications in cold metal forming, especially for sheet metal and tubes.
• This includes processes such as:
  • drawing and deep drawing
  • bending
  • hydroforming
  • tube bending using a mandrel
  • calibrating sintered parts upon sintering

Application notes

• PRESSPATE SEM 95/800 T and PRESSPATE TB should be applied undiluted and at ambient temperature using conventional application methods, for example a sponge, brush or roller. In some cases automatic spreading could be a suitable option.
• PRESSPATE SEM 95/800 T and PRESSPATE TB should not be agitated vigorously prior to application as this might affect the paste’s consistency. 

Technical specifications