Klüber WOLFRACOAT C FLUID High-temperature lubricating compound 200L

Klüber WOLFRACOAT C FLUID High-temperature lubricating compound 200L

pics/Kluber/Copyright EIS/barrel/kluber-wolfracoat-c-fluid-high-temperature-lubricating-compound-200l-01.jpg
  • pics/Kluber/Copyright EIS/barrel/kluber-wolfracoat-c-fluid-high-temperature-lubricating-compound-200l-01.jpg
  • pics/Kluber/klueber_logo.jpg

14934.44 14,934.44 incl. VAT (12,549.95 excl. VAT), per piece *

Availability: Available

Packaging unit: 1 piece

Manufacturer: Klüber

Country of origin: BE/0017

Customs tariff number: 34031980

Weight per piece: 230.0 kg

Please give the recipient email address, as well as your name and email address.

Recipient
Sender

The fields marked with (×) are required.
Security (ANTI-SPAM)
( Examples: two + three = 5, three - five = -2 )
The product description does not help you?
No problem. Simply fill out the form and we will answer you as soon as possible.

Questions about the product

The fields marked with (×) are required.
Security (ANTI-SPAM)
( Examples: two + three = 5, three - five = -2 )
WOLFRACOAT C FLUID High-temperature lubricating compound | N° 099118
  • WOLFRACOAT C FLUID is a viscous high-temperature release agent and lubricating compound based on a mineral and ester oil mixture. It contains solid lubricants, metal pigments and an inorganic thickener.
  • The base fluid starts to evaporate at approx. 200°C, leaving a solid lubricant film, which separates frictional surfaces (dry lubrication).
  • Temperature range: -25°C to +1050°C 
  • Volume: 200 L Barrel
  • Also available in: 1 L canister, 5 L canister, 20 L bucket
Benefits for your application
  • Very good corrosion protection → increased component lifetime
  • Ready-for-use → just mix vigorously
  • Low consumption → low costs, high efficiency
  • Easy application → reduces maintenance time
  • Easier to mix in smaller canisters → less effort required
  • No part-used stock → the 5 l pack size matches the tank of the Klübermatic KD spray pump
Applications
  • WOLFRACOAT C FLUID was developed as a lubricating compound for surfaces subject to high thermal loads, as e.g. in rotary kilns in the base material industry (chemical industry, cement, ore processing, etc.) between the inner surfaces of the tyres and the kiln shell’s slide elements as well as the running surfaces of the axial supports.
  • WOLFRACOAT C FLUID is also suitable for the lubrication of pouring ladles used in the steel industry, and could also be used as a screw compound for high-temperature bolt and screw connections. 
Application notes
  • WOLFRACOAT C FLUID is usually applied to the area between the tyre and the kiln shell with the Klübermatic KD manual spray jet equipment (other commercially available spray devices can also be used). In other cases the product can also be applied by brush. Each tyre should be relubricated once a week with 2-3 litres of WOLFRACOAT C FLUID according to the tyre width. It is important to ensure relative motion between the tyre and the kiln shell. We recommend reference to the relative motion value stated by the OEM (between 10 and 30 mm)
  • NOTE: Always shake WOLFRACOAT C FLUID vigorously prior to application, as the solid lubricants tend to settle out during storage. Without agitation, the spray jet would be filled only with the oil component, which would not provide dry lubrication following evaporation. Additionally, the oil component has an auto-ignition point of approx. 370 °C which may constitute a risk
Technical specifications
 Manufacturer number 0991180766
 Solid lubricants  approx. 16 % by weight
 Colour space grey
 Texture  homogeneous , very viscous
 Service temperature, lower limit -25 °C
 Service temperature, upper limit 1050 °C
 Density, Klüber method: PN 024, 20°C approx. 1.03 g/cm³
 Worked penetration, Klein, 25°C, lower limit 800 0.1 mm
 Worked penetration, Klein, 25°C, upper limit 900 0.1 mm
 Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 24 months
 


Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR,

No files available for download

Property GTIN/EAN MPN (Manufacturer Part Number)
- - Dummy

 

Related products

* Price in Euro including VAT, plus forwarding charges.
In parentheses: price in Euro excluding VAT, plus forwarding charges.
Clients outside the EU as well as companies outside of Germany don't pay any VAT (excepting for shipping in Germany)!

 

 Shopping Cart    
Your shopping cart is empty
 Log in    

Password forgotten

Register

Distributor Login

Password forgotten

Register

 Transport    
forwarders
With package tracking
Shipping in 164 countries!
 Payment    
     
Prepayment using bank transfer => discount on all items of 2% Payment on invoice using bank transfer
 Follow us